ETher NDE AeroCheck Specifications |
Probe |
AeroCheck 2 |
AeroCheck+ |
Connectors |
12 Way Lemo 2b (Absolute, Bridge and Refection) and Connection Lemo 00 (for single element absolute probes) |
Simultaneous probe operation possible using Lemo 12 way and Lemo 00 |
Rotary |
600-3000 rpm - ETher Mercury Drive (ADR002), Hocking 33A100, Rohmann MR3, SR1 and SR2 Drive (special adapter needed) |
Frequency |
Single Freq. = 10Hz – 20MHz with range variable resolution |
Dual Freq. = 10Hz - 12.8MHz |
Gain |
Overall |
-18 to + 100 dB, 0.1, 1 and 6dB steps (100dB maximum) |
Input |
0dB or 12dB |
Drive |
0dB, 6dB and 10dB (0dB reference 1mW into 50 ohm) |
Max X/Y Ratio |
+/-100.0 dB |
Phase |
Range |
0.0-359.9°, 0.1° steps |
Auto Phase |
Allows phase angle to be automatically set to a pre set angle |
Filters |
Normal High Pass |
DC to 2kHz or Low Pass Filter, which ever is the lower in 1 Hz steps. Plus variable adaptive balance drift compensation 0.01 - 0.5 Hz (6 steps) |
Normal Low Pass |
1Hz to 2kHz or a quarter of the lowest test frequency, which ever is lower in 1 Hz steps |
Balance |
Manual |
14 internal balance loads; 2.2µH, 5.0µH, 6.0µH, 6.5µH, 7.0µH, 7.5µH, 8.2µH, 12µH, 15µH, 18µH, 22µH, 30µH, 47µH, 82µH |
Automatic |
Optimized balance load selection |
Alarms |
Box |
Fully configurable, Freeze, Tone or visual |
Sector |
Fully configurable, Freeze, Tone or visual |
Output |
Open collector transtor (50v dc at 10mA max) available on 12 way Lemo |
Display |
Type |
5.7” (145mm), 18 bit Color, daylight readable |
Viewable Area |
115.2mm (Horizontal) x 86.4mm (Vertical) |
Resolution |
640 x 480 pixels |
Flip |
Manual or automatic screen orientation change to enable left or right handed use |
Color Schemes |
User configurable Dark, Bright and Black & White |
Configurable Screen |
Full Screen, Single, Dual Spot or Dual Pane with variable size and location and function e.g. XY, Timebase, Waterfall and Meter |
Display Modes |
Spot, Time base (0.1-20 seconds x 1-200 sweeps and up to 55 seconds), Waterfall and Meter with peak hold and % readout |
Graticules |
None, Grid (4 sizes 5, 10, 15 and 20% FSH), Polar (4 sizes 5, 10, 15 and 20% FSH) |
Offset |
Spot Position: Y =-50 to +50, X =-65 to +65% |
Digital Spot |
Display in X,Y or R,θ |
Position Readout Summary |
Display of all settings in Legacy Format |
Removable Data Storage |
Setup Storage |
micro SD up to 32GB, holding over 10,000 settings |
Stored Screen |
micro SD up to 32GB, holding over 10,000 screen shots |
Shots |
Comprehensive Record Replay and Storage |
Record Replay |
Real-time recording of trace data and Replay on instruments and desktop PC up to 164 seconds |
Outputs |
PC Connectivity |
USB (Full PC remote control plus Real Time data) |
Digital volt free alarm |
On Lemo 12 way Open collector transistor (36v dc at 10mA max) |
VGA |
Full 15 way VGA output |
General |
Languages |
English, French, Spanish, Russian, Japanese, Chinese, Turkish |
Verification Level |
The system includes on delivery a 2 year validity Verification Level 2 detailed functional check and calibration as per ISO 15548-1:2013 |
Power on Self Test |
The system performs a self test on start up of external ram, sd ram, accelerometer, Micro SD card, LCD screen buffer |
Power |
External |
100-240 v 50-60Hz 30 Watts |
Battery |
Internal 7.2V nominal @ 3100mAh = 22.32 watt.hr |
Running Time |
Up to 8 hours with a 2MHz Pencil Probe 30% Back Light and up to 6 hours with a Rotary Drive at 3000rpm 50% duty cycle |
Charging Time |
2.5 hrs. charge time, Simultaneous charge and operation |
Physical |
Weight |
2.7 lbs (1.2 kg) |
Size (WxHxD) |
9.4” x 5.7” x 2.1” (237.5mm x 144mm x 52mm) |
Material |
Aluminum alloy Mg Si 0.5 powder-coated |
Operating Temp |
-20 to +60 °C |
Storage Temp |
Storage for up to 12 months -20 to +35 °C Nominal +20 °C |
IP Rating |
54 |