Kodak M-35A X-OMAT Automatic Processor

Kodak M-35A X-OMAT Automatic Processor

Reconditioned

Kodak Industrex Model M35A Processor - Reconditioned

The Kodak Industrex model M35A Processor is highly compact and requires only a 110-Volt grounded power source, allowing the benefits of automatic processing to be brought to the smaller department or site operation. It is also versatile, producing high quality results from a wide range of film sizes and grades.

The unit is designed to save you money with its energy conserving features and it addresses environmental concerns by providing convenient options for proper disposal of exhausted chemical effluents. The Industrex M35A gives you the quality and capabilities you need right at your fingertips.

Easy to Use:

  • Compact 26.5" x 29.7" (67.3 cm x 75.4 cmm) footprints, means the M35A is small enough for easy transport and conserves table or counter space.
  • Automatic Replenishment means convenience and efficiency. Replenishment rates are easily preset to accomodate specific film and exposure requirements.
  • Automatic standby mode turns off drive, dryer blower and dryer heater when system is not in use. Full operation is restored at the touch of a button. Ideal for intermittent system use.
  • The M35A offers multi-speed processing. It handles a wide range of film sizes and processes both single and double emulsion film.

Easy to Trust:

  • For excellent reliability, the M35A utilizes the same high quality components of longer Kodak Industrex processors.
  • A thermistor logic circuit, water heat exchanger and developer recirculation system, help ensure consistent developer temperature with an accuracy of 0.5°F (0.3°C).
  • Warm air drying means optimum film surface quality.

Easy to Install:

  • Simplified plumbing requirements eliminate the need for hot-water lines and thermostatic mixing valves.
  • Features through-the-wall installation capability.

Easy on the Budget:

  • Saves energy costs by using ambient temperature wash water, eliminating heat costs.
  • Automatic standby control saves energy and wear when the system is not in use.
  • A 10-micron filter in the developer circuit, removes particles to extend solution life. Life is further extended by 8 gallon (34 liter) replenishment tanks, that feature floating lids to retard oxidation.

There are wide choice of film and processing cycles for you to choose from:

Capacity:

Film Size No. of films side by side 2.5 min cycle
films/ hour
8.5 min cycle
films/ hour
10.5 min cycle
films/ hour
14 x 17 in. (35 x 43 cm) 1 100 30 23
7 x 17 in. (18 x 43 cm) 2 212 60 46
4.5 x 17 in. (11.4 x 43 cm) 3 318 90 68
3.5 x 10 in (8.9 x 25.4 cm) 4 540 180 140

Roll Film:

The Industrex M35A processor can process up to 4 strands of 60 or 70 mm or 3 strands of 100 mm film at the following rates:


Film Size 2.5 min cycle
30 in./ min.
8.5 min cycle
10 in. / min.
10.5 min cycle
8 in./ min.
3 ft (1 m lengths) 120 films/ hour 60 films/ hour 46 films/ hour
9 ft (3 m lengths) 40 films/ hour 20 films/ hour 15 films/ hour

Film formats:

Sheets greater then 4 x 4 inches (10 x 10 cm) and up to 14 inches (35 cm) wide. Rolls up to 14 inches (30 cm) wide with a length of 15ft (5 m).

  • For archival washing of films, 77°F (25°C) water must be used.
  • 2.5 min cycle can be used with Industrex B, P, G and S films only.
Description Part # Saved Price Select Option Add to
Kodak M-35A Processor - Reconditioned RT-KP-M35A Request Pricing