ElektroPhysik MikroTest 6 Automatic Coating Gauges

ElektroPhysik MikroTest 6 Automatic Coating Gauges

ElektroPhysik MikroTest 6 Automatic Coating Thickness Gauges

The Coating Thickness Testing Gauge for Testing Coatings on Steel

Automatic operation means that the operator tensions the scale on the gauge, which has a special tension spring built into it and the gauge controls the entire measurement process after the magnet is set on the surface. The special tension spring applies a pull-off force to the magnet until the magnet lifts off the coating, at which time the scale stops turning and locks the scale automatically. The thickness can be read off the scale.

Features:

  • Tests all coatings on steel, e.g. paints, powder coating, enamels, chrome, zinc...
  • Increased repeatability
  • Measures at any angle
  • No power supply is required

MikroTest 6 - Automatic

Model / Part # Features
MikroTest GM 6 -Automatic
Part # - CT-EP-80-641-0101

(old part # - CT-EP-Mikro-010020)

The MikroTest GM 6 Automatic uses the magnet attraction Principle to measure electroplating and paint coatings on steel.

Features:

  • 0 to 4 mils range
  • +.04 mils ±5% tolerance
  • 0.040" minimum base
MikroTest G 6 Metric - Automatic
Part # - CT-EP-80-641-0001)

(old part # - CT-EP-Mikro-010030)

The MikroTest G 6 Metric - Automatic uses the magnetic attraction Principle to measure electroplating and paint coatings on steel.

Features:

  • 0 to 100 µm range
  • ± 1 µm or 5% tolerance
  • 0.5 mm minimum base
MikroTest ZnFe Ounces - Automatic
Part # - CT-EP-80-649-0000

(old part # - CT-EP-Mikro-010040)

The MikroTest ZnFe uses the magnetic attraction Principle to measure zinc galvanization on a ferrous substrate.

Features:

  • 0 to 2 oz. / ft. range
  • +.02 oz. ±5% tolerance
  • 0.040" minimum base
MikroTest FM 6 - Automatic
Part # - CT-EP-80-640-0101

(old part # - CT-EP-Mikro-010120)

The MikroTest FM Automatic uses the magnetic attraction Principle to measure zinc galvanization on a ferrous substrate.

Features:

  • 0 to 40 mils range
  • +.20 mils ±5% tolerance
  • 0.040" minimum base
MikroTest F 6 Metric - Automatic
Part # - CT-EP-80-640-0001

(old part # - CT-EP-Mikro-010130)

The MikroTest F Metric - Automatic uses the magnetic attraction Principle to measure paint coatings on steel.

Features:

  • 0 to 1000 µm range
  • ± 5 µm or 5% tolerance
  • 0.5 mm minimum base
MikroTest S3M 6 - Automatic
Part # - CT-EP-80-642-0101

(old part # - CT-EP-Mikro-010220)

The MikroTest S3M - Automatic uses the magnetic attraction Principle to measure enamel, plastic and rubber on steel.

Features:

  • 8 to 120 mils range
  • ±5% tolerance
  • 0.040" minimum base
MikroTest S3 6 Metric - Automatic
Part # - CT-EP-80-642-0001

(old part # - CT-EP-Mikro-010230)

The MikroTest S3 6 Automatic - Metric uses the magnetic attraction Principle to measure the thickness of thicker paint, powder coating, e-coat and intumescent fire protection coatings applied over ferrous substrates.

Features:

  • Type 1 gauge classification
  • .2 to 3 mm range
  • ±5% tolerance
  • 1.0mm minimum base thickness required
MikroTest S5M 6 - Automatic
Part # - CT-EP-80-643-0101

(old part # - CT-EP-Mikro-010320)

The MikroTest S5M - Automatic uses the magnetic attraction Principle to measure enamel, plastic and rubber on steel.

Features:

  • 20 to 200 mils range
  • ±5% tolerance
  • 0.060" minimum base
MikroTest S5 6 Metric - Automatic
Part # - CT-EP-80-643-0001

(old part # - CT-EP-Mikro-010330)

The MikroTest S5 6 Automatic - Metric uses the magnetic attraction Principle to measure the thickness of thicker paint, plastic and rubber applied over ferrous substrates.

Features:

  • Type I Gauge Classification
  • .5 to 5 mm range
  • ±5% tolerance
  • 1.0mm minimum base thickness required
MikroTest S10M 6 - Automatic
Part # - CT-EP-80-644-0101

(old part # - CT-EP-Mikro-010420)

The MikroTest S10M - Automatic uses the magnetic attraction Principle to measure enamel, plastic and rubber on steel.

Features:

  • 0.10" to 0.40" range
  • ±5% tolerance
  • 0.80" minimum base
MikroTest S10 6 Metric - Automatic
Part # - CT-EP-80-644-0001

(old part # - CT-EP-Mikro-010430)

The MikroTest S10 6 Automatic - Metric uses the magnetic attraction Principle to measure the thickness of thicker paint, plastic and rubber applied over ferrous substrates.

Features:

  • Type I Gauge Classification
  • 2.5 to 10 mm range
  • ±5% tolerance
  • 2.0mm minimum base thickness required
MikroTest S20M 6 - Automatic
Part # - CT-EP-80-645-0101

(old part # - CT-EP-Mikro-010500)

The MikroTest S20M - Automatic uses the magnetic attraction Principle to measure enamel, plastic and rubber on steel.

Features:

  • Type I Gauge Classification
  • 0.30" to 0.80" range
  • ±5% tolerance
  • 0.200" minimum base
MikroTest S20 6 Metric - Automatic
Part # - CT-EP-80-645-0001

(old part # - CT-EP-Mikro-010510)

The MikroTest S20 6 Automatic - Metric uses the magnetic attraction Principle to measure the thickness of linings, plastic and rubber applied over ferrous substrates.

Features:

  • Type I Gauge Classification
  • 5 to 20 mm range
  • ±5% tolerance
  • 5.0mm minimum base thickness required
MikroTest Ni50M 6 - Automatic
Part # - CT-EP-80-646-0101

(old part # - CT-EP-Mikro-010620)

The MikroTest Ni50M - Automatic uses the magnetic attraction Principle to measure electroplated nickel.

Features:

  • Type I Gauge Classification
  • 0 to 2 mils range
  • ±0.04 mils or 5% tolerance
  • no base required
MikroTest Ni50 6 Metric - Automatic
Part # - CT-EP-80-646-0001

(old part # - CT-EP-Mikro-010610)

The MikroTest Ni50 6 Automatic - Metric uses the magnetic attraction Principle to measure the thickness of electroplated nickel applied over no-ferrous substrates.

Features:

  • Type I Gauge Classification
  • 0 to 50 µm range
  • ±2 µm +8% tolerance
  • Minimum base thickness not a consideration
MikroTest Ni100M 6 - Automatic
Part # - CT-EP-80-647-0101

(old part # - CT-EP-Mikro-010720)

The MikroTest Ni100M - Automatic uses the magnetic attraction Principle to measure the thickness of electroplated nickel applied over non-ferrous substrates.

Features:

  • Type I Gauge Classification
  • 0 to 4 mils range
  • ±0.04 mils + 5% tolerance
  • Minimum base thickness not a consideration
MikroTest Ni100 6 Metric - Automatic
Part # - CT-EP-80-647-0001
(old part # - CT-EP-Mikro-010730)

The MikroTest Ni100 Metric - Automatic uses the magnetic attraction Principle to measure the thickness of electroplated nickel applied over non-ferrous substrates.

Features:

  • Type I Gauge Classification
  • 0 to 100 µm range
  • ± 1 µ + 5% tolerance
  • Minimum base thickness not a consideration
MikroTest NiFe50M 6 - Automatic
Part # - CT-EP-80-648-0101

(old part # - CT-EP-Mikro-010800)

The MikroTest NiFe50M - Automatic uses the magnetic attraction Principle to measure the thickness of electroplated nickel applied over steel.

Features:

  • Type I Gauge Classification
  • 0 to 2 mils range
  • ±0.08" + 5% tolerance
  • Minimum base thickness not a consideration

MikroTest NiFe50 6 Metric - Automatic
Part # - CT-EP-80-648-0001

(old part # - CT-EP-Mikro-010810)

The MikroTest NiFe50 6 Automatic - Metric uses the magnetic attraction Principle to measure the thickness of electroplated nickel applied over ferrous substrates.

Features:

  • Type I Gauge Classification
  • 0 to 50 µm range
  • ±2 µm + 8% tolerance
  • .020 minimum base thickness

Product Literature

Description Part # Saved Price Add to
MikroTest 6 Automatic Coating Thickness Gauges CT-EP-80-640-0101 Request Pricing