| General: - Size: 2.5" x 6.5" x 1.24" (63.5 x 165 x 1.5mm)
- Weight: 14 oz. (.397 kg) with batteries
- Case: extruded aluminum body with nickel plated aluminum end caps (gasket sealed)
- Display: 1/4 VGA AMOLED color display (320 x 240 pixels). Viewable area: 1.7" x 2.27" (43.2 x 57.6mm). 16 color pallette, multiple color options and variable brightness.
- Screen Refresh Rate: 60Hz
- Display Views:
- Flaw Detector: Full wave, +/- Rectified or RF.
- Thickness Gauge: Digits, +/- Rectified, RF or B-Scan
- Resolution (selectable): +/- 0.001" (0.01mm) or +/- 0.0001" (0.001mm)
- Timing: Precision TCXO timing with single shot 100 MHz 8 bit ultra low power digitizer
- Measurement Gates: Two independent gates (Flaw) and three gates (Thickness). Start & width adjustable over full range. Amplitude 5 - 95%, 1% steps. Positive or negative triggering for each gate with adible and visual alarms.
- Operating Temperature: 14°F to 140°F (-10°C to 60°C)
- Environmental: Meets IP65 requirements
Calibration: - Automatic Calibration: Longitudinal (straight) or Shear (angle)
- Probe Types: Single Contact, Dual, Delay and Angle.
- Units: English (inches), Metric (mm)
- Velocity: 0.0100 to .6300 in/µs (256 - 16,000 m/s)
- Test Range: 0.007" to 1,200" (.178mm to 30,480mm) maximum at steel velocity. Continuously variable.
- Zero Offset (Probe Zero): 0 - 999.999 µs
- Material Velocity Table: Contains longitudinal and shear velocities for a variety of material types.
Pulser: - Pulser Type: Two adjustable square wave pulsers and receivers
- PRF: 8 to 2,000Hz in selectable steps (8, 16, 32, 66, 125, 250, 333, 1,000, 2,000Hz)
- Pulser Voltage: 100 - 200 volt peak amplitude, rise/fall < 10ns into 50ohm
- Pulse Width: 40 to 400 ns. Selectable step options 40, 80 & 400 ns (labeled spike, thin & wide)
| | Receiver: - Gain: 0 to 110dB with 0.2dB resolution. Manual and AGC control.
- Damping: 50, 75, 100, 300, 600 & 1500 ohms.
- Frequency Bands: DFX-7 & 7+: Broadband 1.8 - 19 MHz (-3dB). DFX-7+: Three narrow bands at 2MHz, 5MHz & 10MHz.
- Horizontal Linearity: +/- 0.4% FSW
- Vertical Linearity: +/- 1% FSH
- Amplifier Linearity: +/- 1 dB
- Amplitude Measurement: 0 to 100% FSH, with 1% resolution.
- Delay: 0" - 999" (25,375mm) at steel velocity.
Memory: - Log Formats: Grid (Alpha Numeric) or Sequential (Auto Identifier).
- Capacity: 4 GB Intenal SD card
- Screen Capture: Bitmap graphic capture for quick documentation(.tif).
- Custom Setups: 64 user configurations.
Power Source: - Battery: Three 1.5V alkaline, 1.2V AA Nicad cells, 1.2V AA NiMH or other equivalent power source. Battery life (continuous use). Alkaline(12 hours), Nicad (5 hours) and NiMH (12 hours), with default settings.
- Line Power: USB-C to PC or power outlet.
Connections: - Output: Direct USB-C 1.1 PC connectivity
- Transducer Connectors: Two LEMO 00 connectors
Certification: - Thickness Gauge: Factory calibration traceable to NIST & MIL-STD-45662A.
- Flaw Detector: EN12668-1 compliant
Warranty:
 |