NDT Systems Scanners for BondHub

NDT Systems Scanners for BondHub

Manual and Automatic Scanners for the BondHub & Bondascope System

Overview

C-Scan image creation is made possible with the combination of the BonHub II, Bondascope 3100, and finally, the appropriate Automatic or Manual Scanner & Probe. With Probe attached, the Scanners function is to serve coordinate input to the BondHub System in a manner that is consistent, repeatable, and accurate. The Manual Scanners offered are the SlideScan & StringScan; its Automatic counterpart is the CrosScan. 

 

 

Requisite Components for C-Scan Imaging

The Scanner is only one of three components necessary to create C-Scan images. The Bondascope 3100, Bondhub, and Scanner (in this case, the CrosScan Automatic Scanner) work together to create the C-Scan image. The Bondascope 3100 sends live readings from the CrosScan, which traverses the Composite Material, to the Bondhub, where the C-Scan image is created via the CompVu Interface in MIA, Pitch-Catch, or Resonance readings--depending on Probe Type. Probes, Bondascope, and Bondhub must be purchased separately. Click here for purchasing. 

 

Model Features and Applications

  • The StringScan II is a lightweight, manual X-Y Scanner that is used for ultrasonic inspection of flat or curved surfaces. Two spring-loaded encoders, connected to the probe holder with metal wires, triangulate the X-Y Position of the probe. As the operator scans the test part, the C-Scan display is updated in real time.  It is used across many industries including aerospace, oil & gas, and power generation. 

 

  • The SlideScan is a lightweight, manual X-Y Scanner that is used for ultrasonic or phased-array inspection of composite or metal aerospace fuselages, plates, or storage tanks. A pivoting axis design and spring loaded arm for the probe holder help the probe follow the surface. It is used across many industries including aerospace, oil & gas, and power generation. 3 sizes are available defined by the scan area required. **Note that Probe Holders for conventional or PAUT transducers and the 12ft Encoder Cable must be bought separately for this Scanner to be fully ready for C-Scan imaging. 

 

  • The CrosScan is a high precision two-axis automated scanner with the ability to operate on flat or curved surfaces. Typical applications include in-service composite and metal flaw detection or thickness mapping in the aerospace and composites industries. A unique feature of this scanner is that it may be run on batteries or AC current making the CrosScan very portable and easily deployable.

Probe & Bond Test Mode Selection Guides

As noted above, one of the defining features of the Bondascope 3100 is its universal Probe acceptance and automatic recognition. As a result, Probe selection is extensive. Please consult the following Probe Guide when researching and deciding on your probe needs.

Going hand in hand with Probe Selection, deciding on a Bond Test Mode is of equal importance. Consult the Bond Test Selection Guide to supplement your application research. 

Technical Specifications

StringScan II

StringScan II
Dimensions: 22 x 2 x 7in (55.9 x 5.1 x 17.8cm)
Weight: 2.4lbs (1.1kg)
Cable Length: 12ft (3.7m) 
Scan Length: Min X-Axis: 30in (76.2cm), Min Y-Axis: 30in (76.2cm)
Scan Resolution: 0.02in (0.5mm)
Scan Speed: >30in/s (>0.76m/s) Manual Scanning
Operating Temperature: 15 - 105°F (-10 - 40°C)
SlideScan

SlideScan
Model Options

SlideScan 18x18       Scan Area: 18 x 18in (0.46 x 0.46m)

SlideScan 24x24      Scan Area: 24 x 24in (0.61 x 0.61m)

SlideScan 36x36       Scan Area: 36 x 36in (0.91 x 0.91m)
Dimensions:

18x18 Model: 21 x 21 x 5in (0.53 x 0.53 x 0.13m)

24x24 Model: 27 x 27 x 5in (0.69 x 0.69 x 0.13m)

36x36 Model: 39 x 39 x 5in (0.99 x 0.99 x 0.13m)
Weight: 10 - 15lb (4.5 - 6.8kg)
Cable Length: 12ft (3.7m) 
Scan Resolution: 0.006in (0.15mm)
Scan Speed: >10in/s (>0.25m/s) Manual Scanning
Operating Temperature: 15 - 105°F (-10 - 40°C)
CrosScan

CrosScan
Dimensions: 29 x 29 x 5in(73.4 x 73.4 x 12.7cm)
Weight: 10lb (4.5kg)
Cable Length: 15ft (4.57m)
Scan Length: X: 18in (457mm), Y: 15in (381mm)
Scan Resolution: 0.02in. (0.5mm)
Scan Speed: 8in. /s (203mm/s)
Operating Temperature: 15 - 105°F (-10 - 40°C)

Kit Includes

StringScan II Scanner

  • StringScan II Manual Scanner
  • 12 ft (3.7m) Cable
  • Probe Holder
  • Suction Cup Feet
  • Pelican Shipping Case

 

SlideScan Scanner

  • SlideScan Manual Scanner (Model 18, 24, or 36")
  • Gimble Mount
  • Suction Cup Feet
  • Pelican Shipping Case
  • **Probe Holders and Encoder Cable (12ft (3.7m)) must be bought separately for this Scanner**

 

CrosScan II

  • CrosScan Automatic Precision Scanner
  • 15 ft (4.57m) Cable
  • Batteries
  • Battery Charger 
  • Reconditioning Unit
  • Pelican Shipping Case
Description Part # Saved Price Select Option Add to
NDT Systems StringScan II Two-Axis Scanner BT-NDT-STRCAN
Request Pricing
NDT Systems Slide ScanTwo-Axis Scanner
Model #
BT-NDT-SLDCAN
Request Pricing
NDT Systems CrosScan Automatic Two-Axis Scanner BT-NDT-CSCAN
Request Pricing
NDT Systems SlideScan Two-Axis Scanner Encoder Cable BT-NDT-SLDCANEC
Request Pricing
NDT Systems Slide ScanTwo-Axis Scanner Probe Holder for Conv or PAUT Transducers BT-NDT-SLDCANPH
Request Pricing

Similar Items