Sun-Tec Detroit PH Series - Brinell Hardness Tester
The PH Series Brinell Hardness Testers are simple to use, fast and accurate machines designed to test the hardness of small to medium sized parts. Ruggedly constructed in cast-iron, they are built to withstand some of the most severe working conditions.
Features:
- Adjustable work screw
- Hydralic pump and 3/4 horsepower electric motor assembly
- Rugged cast iron frame
- Load indicator gauge
- Factory calibrated to one load (500 Kg up to 3000 Kgf)
- Accuracy complies with requirements of ASTM-E-10
- Power 115 VAC / 60Hz
- Certified and ready to use
- Optional Dwell Time Unit and floor stand
Specifications:
Item | PH-1 | PH-2 | PH-3 |
Loads: | *500 Kg up to 3,000 Kgf |
Piston Stroke: | 7/16" (11 mm) | 7/16" (11 mm) | 7/16" (11 mm) |
Maximum Speciman Depth: | 6" (152 mm) | 9" (229 mm) | 12" (305 mm) |
Maximum Specimen Height: | 12" (305 mm) | 18" (457 mm) | 34" (864 mm) |
Dimensions:
| 16" x 38" x 40" (406 x 965 x 1,016 mm) | 36" x 45" x 81" (914 x 1,143 x 2,057 mm) | 17" x 50" x 63" (432 x 1,270 x 1,600 mm) |
Work Table: | 21/4" (133 mm) | 21/4" (133 mm) | 21/4" 133 mm) |
Accuracy: | Conforms to ASTM-E-10 |
Weight: | 850 lbs. (386 kg.) | 1,000 lbs. (454 kg.) | 1,200 lbs. (544 kg.) |
Power Supply: | Single Phase 115 VAC |
*Please Specify load when ordering
Standard Accessories:
- One (1) Brinell hardness Standard
- One (1) 10 mm Carbide Ball Indenter
- One (1) 21/4" Flat Anvil
- Conversion Chart
- Manual
- Optional - Dwell Time Unit and Floor Stand