Ray-Check Shims for ASTM-E-1025 IQIs

Ray-Check Shims for ASTM-E-1025 IQIs

Shims are used with ASTM-E-1025 Penetrameters

Overview

Some codes require that shims be used under penetrameters to compensate for thickness of a backing ring or weld reinforcement. Shims are supplied in the same materials as penetrameters. They are available in sizes 0.005” thru 1" thick. Material and size identification indicating actual thickness is marked on each shim.

Shims are ordered individually. You specify a specific thickness up to three decimal places within the ranges listed below.

Materials

Standard shims are available in the following materials:

  • Steel (1018)
  • Aluminum-6061
  • Aluminum (2014, 2024, 2219 or 7075)
  • Magnesium (AZ31 & ZK60)
  • Stainless Steel
  • Copper
  • Brass
  • Inconel (600, 625 & 718)
  • Cupronickel
  • Phosphor-Bronze
  • Nickel
  • Monel
  • Hastelloy X & C
  • Waspaloy
  • Titanium (6/4)
  • Cobalt (Hanes 25 & 188)
  • Zirconium

Note

Shims are 3/4" x 2" x T. These dimensions allow at least 1/8" clearance on each side of the penetrameter when used with ASTM-E-1025. They are not to be used for applications requiring conformance to ASTM-E-1742. You cannot use ASTM-E-1742 Penetrameters with a Shim, as shims are not long enough to meet the 1/8”  clearance requirement. See right image. For ASTM-E-1742, see Mounting Blocks

*Specify individual sizes and quantity in the comments section during checkout.
*Specify specific alloy, if applicable, in comments section during checkout.

Prices below are per block

 

Note: Shims can be ordered in metric (mm) sizes by request. Metric Shims will be marked in millimeters only unless both millimeters and inches are specifically requested. Calibration Certificate (if ordered) will show both millimeters and inches.

Minimum Order Size is $75

Note: Serialized radiographic products are not returnable

Description Part # Saved Price Select Option Add to
Shim - Aluminum 6061 (Specify a Specific Thickness Within the Range Selected in the Notes Section at Checkout)
Model #
RT-RC-SH-AL-Master $13.00
Shim - Aluminum 2014, 2024, 2219 or 7075 (Specify a Specific Thickness Within the Range Selected in the Notes Section at Checkout)
Model #
RT-RC-SH-ALO-Master $18.00
Shim - Phosphorus-Bronze (Specify a Specific Thickness Within the Range Selected in the Notes Section at Checkout)
Model #
RT-RC-SH-BP-Master $33.00
Shim - Brass (Specify a Specific Thickness Within the Range Selected in the Notes Section at Checkout)
Model #
RT-RC-SH-BR-Master $19.00
Shim - Cupro-Nickel (Specify a Specific Thickness Within the Range Selected in the Notes Section at Checkout)
Model #
RT-RC-SH-CN-Master $33.00
Shim - Cobalt Haynes 25 or 188 (Specify a Specific Thickness Within the Range Selected in the Notes Section at Checkout)
Model #
RT-RC-SH-CO-Master $72.00
Shim - Steel 1018 (Specify a Specific Thickness Within the Range Selected in the Notes Section at Checkout)
Model #
RT-RC-SH-CS-Master $13.00
Shim - Copper (Specify a Specific Thickness Within the Range Selected in the Notes Section at Checkout)
Model #
RT-RC-SH-CU-Master $19.00
Shim - Hastalloy C (Specify a Specific Thickness Within the Range Selected in the Notes Section at Checkout)
Model #
RT-RC-SH-HC-Master $43.00
Shim - Hastelloy X (Specify a Specific Thickness Within the Range Selected in the Notes Section at Checkout)
Model #
RT-RC-SH-HX-Master $43.00
Shim - Inconel 600 (Specify a Specific Thickness Within the Range Selected in the Notes Section at Checkout)
Model #
RT-RC-SH-IN-Master $33.00
Shim - Inconel 625 or 718 (Specify a Specific Thickness Within the Range Selected in the Notes Section at Checkout)
Model #
RT-RC-SH-INO-Master $47.00
Shim - Magnesium AZ31 or ZK60 (Specify a Specific Thickness Within the Range Selected in the Notes Section at Checkout)
Model #
RT-RC-SH-MG-Master $15.00
Shim - Monel (Specify a Specific Thickness Within the Range Selected in the Notes Section at Checkout)
Model #
RT-RC-SH-ML-Master $43.00
Shim - Nickel (Specify a Specific Thickness Within the Range Selected in the Notes Section at Checkout)
Model #
RT-RC-SH-NI-Master $43.00
Shim - Stainless Steel (Specify a Specific Thickness Within the Range Selected in the Notes Section at Checkout)
Model #
RT-RC-SH-SS-Master $19.00
Shim - Titanium 6/4 (Specify a Specific Thickness Within the Range Selected in the Notes Section at Checkout)
Model #
RT-RC-SH-TI-Master $47.00
Shim - Waspaloy (Specify a Specific Thickness Within the Range Selected in the Notes Section at Checkout)
Model #
RT-RC-SH-WA-Master $47.00
Shim - Zirconium (Specify a Specific Thickness Within the Range Selected in the Notes Section at Checkout)
Model #
RT-RC-SH-ZR-Master $47.00
Serialization & Calibration for Ray-Check Shims RT-RC-SH-S&C $3.00