| Description | Part # | Saved | Price | Select Option | Add to |
|---|---|---|---|---|---|
| Carestream Industrex M43iC High Volume Film Processor | RT-CA-M43iC |
|
Request Pricing | ||
Designed for the needs of high-volume NDT customers, the Industrex M43iC provides multiple processing cycles and dry-to-dry processing in as little as five minutes. This processor also comes standard with an integrated closed loop chiller to ensure consistent temperature in hot environments or when water supply is not temperature controlled to further enhance capability and image quality in harsh NDT environments.
The units’ intuitive keypad interface simplifies operation, and allows new users to become experts in a hurry. Touch a few buttons, and you can preprogram up to nine different settings to automatically accommodate your most frequent applications. Install these processors for free-standing operation in darkroom or for convenient through-the-wall feeding—load exposed film in darkroom, collect processed films in normal room light.
Quality images, efficient output, energy and water savings
These feature-rich processors include state-of-the-art microprocessor control, to automatically monitor and regulate:
Robust Features
Pair the M43iC with the IS-199 Chemical Mixer, the ultimate automatic x-ray chemical mixer with specific gravity control to produce a consistent mix each and every time. The mixer responds to the addition of concentrated chemicals and adds the correct amount of water automatically. Made with reliable and rugged materials and includes a low level warning system that resets automatically.
| Application | |
| Unit Description | Floor-standing, high capacity general NDT radiography |
| Site Application | Intended for fixed laboratory installation (Not recommended for mobile lab applications) |
| Film | |
| Film Format Types | Rolls & Cut sheets of NDT x-ray films |
| Recommended Development Time & Temp | 100 sec development time (39cm/min) @ 26°C |
| Film Sheets Processing Capacity/hour (35x43cm) | 58 sheets/hr @ 100 sec recommended development time |
| Film Thickness | 0.10 mm–0.18 mm |
| Material Length (min.) | 10 cm minimum |
| Material Width | 7.0 cm–43.0 cm Note: For multi-loading of narrow width films, feed tray loading guides are required for film widths 70mm-100mm and are available from the OEM as an accessory |
| Time/Speed | |
| Cycle Time (Dry to Dry)(min.) | 2.1–12.6 min (8 min @ 100 sec recommended development time) |
| Intake Speed (cm/min.) | 128–22 cm/min (39 cm/min @ 100 sec recommended development time) |
| Time in Developer (sec.) | Range: 60–184 sec (39 cm/min @ 100 sec recommended dev time) |
| Transport | |
| Developer to Fixer Crossover Style | Fixer spray bar style crossover |
| Processing Solutions | |
| Adjustable Replenishment Rates | Yes, set in ml/m2 of film processed |
| Cooling Liquid | 2.5 L chiller fluid |
| Cooling System | Integrated internal chiller with closed loop cooling system (Included accessory) |
| Chiller Connectivity | N/A (chiller built in) |
| Replenisher Tanks | 2x50 liter/dust cover lids and floating lid for developer tank |
| Low Replenisher Tank Solution Alarm | Optional accessory ordered from OEM |
| Replenishment Type | Automatic IR scanning sensor based on film area |
| Solution Filter Elements | Developer filter |
| Solution Heating (Developer and Fixer) | Adjustable in a range of 18°C–43°C (separate in-line 350W heaters) |
| Solution Level Monitoring | Yes, with automatic top off at start up of developer, fixer and wash tanks |
| Developer | |
| Developer Tank Size | 13.4 L (including developer filter system) |
| Developer Tank Recirculation Pump | Yes |
| Fixer | |
| Fixer Tank Size | 13.3 L |
| Fixer Tank Recirculation Pump | Yes |
| Wash | |
| Wash Tank Feature | Deep-tank design for enhanced washing and archival keeping capability |
| Wash Temp Sensor | No |
| Wash Tank Level Sensor | Low level wash tank monitoring sensor |
| Wash Tank Recirculation Pump | No |
| Wash Water Tank Size | 11.5 L |
| Wash Water Reduction System | Water used only on demand. 2.5 L/min during process cycle |
| Incoming Water Supply | Incoming water supply must be filtered. Supplied by user at installation. |
| Dryer | |
| Dryer Range | Adjustable in a range 18°C–60°C |
| Dryer Type | Warm air |
| Integral Warm Air Exhaust Port | Yes. Note: A ventilation duct exhaust booster fan (not included) is necessary to ensure proper air flow through the unit. Supplied by user at installation |
| Operation | |
| Number of Programming Channels Available | 9 Channels (Channel 1 is pre programmed with standard process cycle recommendations) |
| Automatic Cleaning Cycle | Yes |
| Feed Tray Cover | Included |
| Film Feed Signal | Yes |
| Rack Drip Tray | Included as standard |
| Relocatable Control Panel Unit | Yes |
| Spare Parts Kit | Small parts kit included as standard |
| Power Requirements | 230VAC +/-10%, 50-60hz single Phase, 16A, 3.6KW |
| Automatic Standby | Yes, power and wash water savings |
| Installation Configuration Options | Free-standing floor model or through-the-wall |
| Processor Stand | N/A |
| Weight | Empty: 177 kg, with solution: 215 kg |
| Emergency Shut Off Switches | Yes, mainframe mounted safety switch with top cover safety switches |
| Other Features | |
| Anti-Oxidation/Cleaning Programming | Yes |
| Precision Speed Control | Yes, motor tachometer pulse regulation |
| Developer Filter Change Prompt | Yes |
| Processor Monitoring | Yes, operator displays w/ audible alerts |
| Description | Part # | Saved | Price | Select Option | Add to |
|---|---|---|---|---|---|
| Carestream Industrex M43iC High Volume Film Processor | RT-CA-M43iC |
|
Request Pricing | ||