Western Instruments WM Permanent Magnet Yokes

Western Instruments WM Permanent Magnet Yokes

Hinged Frame and Cable Type Units

Portable Magnet Yokes

There are 3 models in the WM-Series: Hinged Frame unit WM-5, lightweight Hinged Frame unit WM-5LT and Cable Type unit WM-5C. The WM-5 and WM-5LT are equipped with Rotating Contact Feet, which easily permits the inspector to maximize the contact area between the Dual Contact Surfaces on the pole pieces and the workpiece. Both of these units have field replaceable magnet cartridges, in the unlikely event of a failure. The WM-5C has a Coated Cable that allows a great deal of flexibility to easily permit maximum contact area between the Non-Ferrous contact surface and the workpiece. Features an ergonomically designed hand grip for operator comfort, with provisions for easy removal off the workpiece. Permanent Magnet Yokes offer complete portability due to not requiring electricity. All WM-Series Yokes utilize Rare Earth Magnet Cartridges specifically manufactured to high performance needs. WM-Series Yokes lift over 60 Pounds, and with recharging not being necessary, the minimum lift of 50 pounds (23 Kg) is assured for years. All WM-Series Yokes are delivered with a Calibration Certificate and Operators Manual.

 

 

Features

  • Powerful Lift
  • Light Weight
  • Compact
  • No Recharging
  • Completely Portable
  • Durable
  • Hinged Frame and Cable Type
  • Hazardous Zones

Applications

  • Automotive
  • Pressure Equipment
  • Manufacturing
  • Aerospace
  • Piping
  • Fabrication
  • Weld Inspection

Inspection Kits

Basic Wet Method W-WMB Kit

  • Carrying Case
  • Aerosol Cans of: 1 Black Prepared Bath, 1 White Contrast Paint and 1 Cleaner/Remover
  • Field Indicator (Pocket Magnetometer)
  • Operator Instructions

More Info

Wet Method W-WM Kit

  • Carrying Case
  • Aerosol Cans of: 4 White Contrast Paint, 4 Black Oxide and 8 Cleaner/Remover
  • Field Indicator (Pocket Magnetometer)
  • Operator Instructions

More Info

 

Wet Fluorescent Method W-WF Kit

  • Carrying Case
  • Aerosol Cans of: 6 Fluorescent Particle Bath, 6 Cleaner/Remover
  • SPR-365 UV LED Flash Light
    • Wrist Strap
    • Battery Charger
    • Spare Battery
    • UV Spectacles
    • Calibration Certificate
    • Instruction Manual
  • Field Indicator (Pocket Magnetometer)
  • Operator Instructions

More Info

Wet Fluorescent / Dry Method W-WFD Kit

  • Carrying Case
  • Aerosol Cans of: 4 Fluorescent Particle Bath, 4 Cleaner/Remover
  • 4 x 1 ¾ Pounds (800g) of Dry Method Powder; Powder: Grey, Red, Black, and Yellow
  • Field Indicator (Pocket Magnetometer)
  • Economy Pie Gauge
  • Powder Bulb
  • Operator Instructions
  • Western SPR-365 UV LED Flash Light (Torch)
    • Spare Battery
    • Battery Charger with AC and 12VDC Adaptors
    • Wrist Strap
    • UV Spectacles
    • Calibration Certificate
    • Operator Instructions

Technical Specifications

WM-5, WM-5LT and WM-5C Specifications

Specification WM-5 WM-5LT WM-5C
Capacity >50 pounds (23 kg)
Field Strength with Tips in Contact 9200 Gauss 8500 Gauss 10900 Gauss 2mm (0.80") Air Gap
Field Strength with 2" (50mm) Air Gap 510 Gauss 380 Gauss 5700 Gauss (Single Pole Only)
Pole Spacing 0-14" (0-350 mm) 0-24" (0-610 mm)
Weight 5 pounds (2.3 kg) 3 pounds (1.4 kg) 2 pounds (0.9 kg)
Description Part # Saved Price Select Option Add to
Western Instruments WM-5 Standard Permanent Magnet Yoke MT-WI-WM-5 $535.00
Western Instruments WM-5LT Light and Compact Permanent Magnet Yoke MT-WI-WM-5LT $545.00
Western Instruments WM-5C Long Cable Type Permanent Magnet Yoke MT-WI-WM-5C $575.00