The Baugh & Weedon MagnaCheck 3D is a powerful electromagnetic field detector (otherwise known as a gaussmeter or magnetometer) used to measure the strength and direction of magnetic fields. It is the first in its class to incorporate a 3D sensor that displays the information in X, Y and Z planes which has allowed users to save time by increasing efficiency. Match that with an ergonomic, rugged design and you have an instrument that will get the job done reliably every time, no matter where you are.
| 3D Probe | 1D Probe | |
| Measurement Range | Up to 2,000 Gauss | Up to 1,000 Gauss |
| Units | Gauss, mTesla, Ka/m | |
| Measurement Modes | DC, AC Peak, True RMS | |
| MPI Bench Support | True RMS for thyristor switched fields | True RMS and shot time measurement |
| Peak Hold Mode | Off, 1, 2, 5 and 10 seconds | Off, 1, 2, 5 and 10 seconds |
| Measurement Sample Rate | 70 samples / second | 500 samples / second |
| Measurement Resolution | 0.16 Gauss | 0.1 Gauss |
| Probe Type | 3D Auto Recognition | 1D Transverse |
| Sensor Calibration | Stored digitally in probe | |
| Measurement Accuracy | 1% | |
| Standards Compliance | ASTM E1444/1444M-16 and EN ISO 9934-3 | |
| Zeroing | Manual zero with null pot supplied | |
| Display Type | Color LCD with selectable backlight | |
| Display Size and Resolution | 2.8" (70 mm), 320x240 pixels | |
| Power | 2x 1.5V AA Batteries | |
| Typical Battery Life | In excess of 10 hrs continuous use | |
| Dimensions |
Without Rubber Boot: 6.4" x 3" x 1" (163 x 80 x 25 mm) With Rubber Boot: 6.6" x 3.3" x 1.2" (168 x 85 x 30 mm) |
|
| Weight | 0.77 lbs (350 g) including batteries | |
