Lorad LPX-200

Lorad LPX-200

Note: This product has been replaced by the improved SPX-200:

Lorad SPX-200

Lorad LPX-200

  • Constant Potential Output
  • End Grounded Exposed Anode
  • Portable, Repeatable, Accurate
  • 100% Duty Cycle
  • Unparalleled Resolution Imaging
  • Liquid or Air Cooled Models
  • Penetration of up to 51 mm Fe
  • Glass or Metal Ceramic Insert


200 kV Portable Industrial NDT X-Ray Imaging System

Spellman's LPX Series are perfectly suited for today's demanding NDT Inspection requirements. LPX units are rugged, yet easy to transport and economical to maintain. They can be line or portable generator powered, automatically adapting to standard input voltages, to permit all day inspection under extreme conditions virtually anywhere.

The end grounded X-Ray tubes have a focal spot of 1.5mm sq. and the exposed anode allows for easy and flexible positioning of the tube head assembly. The tube ports use a low-absorption beryllium window that allows the radiographer to utilize the full spectrum of the X-Ray energy. The high radiation output of the LPX systems allow for lower kV per exposure, shorter exposure times and increase film contrast for superior radiographic imaging.

The LPX microprocessor-driven control unit provides automatic warm-up and comprehensive self diagnostic circuitry. The LPX has enough memory to store and recall up to 250 exposure techniques and the last set of exposure parameters is retained before powering down. The LPX is adjustable in 1kV and 0.1mA increments. Exposure duration can be set from 1 second to 99 minutes and 59 seconds in 1 second increments; mAs is variable from 0 to 29995 mAs.


  • Aerospace
  • Manufacturing
  • Defense
  • Aviation
  • Energy
  • Security Systems
  • NDT Applications

Standard Accessories:

  • Operation Manual
  • Tubehead Carrying Case
  • Tubehead Cable - 100' with Strain Relief
  • Extra Key (1) for Control Unit Safety Lock
  • Power Cable - 25' with Strain Relief
  • Coolant Hose - Twin, 50' with Self-Sealing Terminations (liquid cooled only)
  • Cooler Power Cable

Optional Accessories:

Laser Pointer
Spellman's exclusive Laser Pointer allows pinpoint image area targeting. The Laser Pointer projects a highly visible reference laser beam from the tubehead to surfaces up to 75 feet away, showing precisely where the central X-Ray beam will be located, providing unmatched accuracy for greater efficiency and reduced set up times.
Model 1620 Tubehead Stand
An optional X-Ray Tubehead Stand allows for quick set up and provides rigid support for optimal image quality with three axis positioning of the tubehead assembly. The stand incorporates telescoping legs, a hand wheel-driven variable height adjustment and lockable hand wheel controlling the tubehead tilt and horizontal rotation. The tubehead cradle is cushioned for secure mounting and vibration damping. A bubble-type indicator is included for quick and easy leveling of the tubehead. Black anodized aluminum construction. 35 lbs. (15 kg) approximately.
Optional Air Cooled Tube Head Assembly
The air cooled tube head assembly uses a heat sink and high volume fan to dissipate heat from the anode and is typically used in applications that do not have limited access and are not in a volatile fuel vapor atmosphere. The air cooled tube head assembly does not require the cooler unit and the associated mixing and maintenance of liquid coolant. This unit requires less user maintanence and is considered more environmentally friendly.
Optional Panoramic Tube Head Assembly
The panoramic tube head assembly comes in a liquid cooled version only and produces radiation in a 360 degree cone, making it ideal for aircraft FOD inspection, pipe and tank inspection or any application that requires circumferential radiographic inspection.




Input Line Requirements:
Automatically adapts to input line voltage
100 - 130 VAC, 50/60 Hz, 20 Amperes maximum
200 - 250 VAC, 50/60 Hz, 10 Amperes maximum
May also be portable-generator operated

X-Ray Output:
10 - 200 kV, 0.1 to 10.0 mA (900 watts maximum)
Constant potential, end-grounded anode, air or liquid cooled versions available

X-Ray Tube Window:
Beryllium 1.0 mm

Radiation Coverage:
40° directional or 360° panoramic tube available

Radiation Output:
21 R/min at 50cm filtered with 0.5 inches (12.7 mm) aluminum at 200 kV, 4.5mA

Duty Cycle:
100% - liquid or air cooled

Effective Focal Spot:
Standard: 0.060 in. sq. (1.5 mm sq.)
Panoramic: 0.4 x 4.0 mm (IEC336)

Ambient Temperature:
100% duty cycle @ 120°F (49°C)

Storage Temperature:
-30°F to 160°F (-35°C to 71°C)

Anode Cooling:
Liquid coolant solution closed loop between X-Ray tube anode and cooling unit or fan-forced air cooling

Liquid Cooling Unit Dimensions:
12.7" x 15.5" x 15.7" (322.6 x 393.7 x 398.8 mm)

Liquid Cooling Unit Weight:
54 lbs. (24.5 kg) approximately

LPX200 Tube Head Dimensions:
Liquid Cooled: 8.38" x 26.5" (212.9 x 673.1 mm)
Air Cooled: 8.38" x 30.0" (212.9 x 762 mm)
Panoramic: 8.38" x 26.5" (212.9 x 673.1 mm)

LPX200 Tube Head Weight:
Liquid Cooled: 37 lbs. (16.78 kg)
Air Cooled: 41 lbs. (18.60 kg)
Panoramic: 37 lbs. (16.78 kg)

X-Ray Control Unit:
Digital microcomputer based

X-Ray Control Unit Dimensions:
12.7" x 17.5" x 10.5" (322.58 x 441.96 x 266.7 mm)

X-Ray Control Unit Weight:
34 lbs. (15.4 kg) approximately

Safety Devices:

  • Tubehead Pressure Relief Valve
  • Tubehead Thermal Cut-Out
  • Tubehead Pressure Gauge
  • Tubehead Low Pressure Cut-Out @ 25 psi (1.72 Bar)
  • Coolant Flow Sensor (liquid cooled only)
  • Control Unit Safety Keyswitch
  • Microcomputer based Self Diagnostics
  • Continuous Exposure Parameter Display

Radiation Leakage:
Less than 0.8 Roentgens per hour at 1 meter from X-Ray tube target. 2.0 Roentgens per hour for Air Cooled units.

Description Part # Saved Price Select Option Add to
Lorad LPX-200 RT-SP-200 Discontinued Item