Rebound Hardness Tester dynaROCK II with impact device D, test block, USB charger, direct data transfer to a USB flash device, test certificate, robust aluminum case
|
HT-BAQ-21-100-EN
|
|
$2,765.00
|
|
Carrying bag with shoulder strap for dynaROCK II with impact device
|
HT-BAQ-21-113-EN
|
|
$210.00
|
|
Mobile printer for dynaROCK II
|
HT-BAQ-21-112-EN
|
|
$740.00
|
|
Impact Device D for hardness Tester dynaROCK II - Standard impact device for most hardness testing tasks
|
HT-BAQ-21-120-EN
|
|
$1,125.00
|
|
Impact Device DL for Hardness Tester dynaROCK II - Impact device with longer impact body. The diameter of the front pipe is 0.17" (4.2mm)
|
HT-BAQ-21-121-EN
|
|
$2,055.00
|
|
Impact device DC for Hardness Tester dynaROCK II - Extremely short impact device for measurements in inaccessible locations or in pipes.
|
HT-BAQ-21-122-EN
|
|
$1,125.00
|
|
Impact Device D+15 for Hardness Tester dynaROCK II - The impact device has a recessed reactance coil and a smaller placement surface (0.4" x 0.55" x 0.8")(11 mm x 14 mm instead of 20 mm) for hardness measuring in slots and deepened areas.
|
HT-BAQ-21-123-EN
|
|
$1,275.00
|
|
Impact Device C for Hardness Tester dynaROCK II - Impact device with lower impact energy e.g. for measurements on surface-hardened parts. The impressions are approximately only half as deep as in case of impact device D, however the requirements on t
|
HT-BAQ-21-124-EN
|
|
$1,125.00
|
|
Impact Device G for Hardness Tester dynaROCK II - Impact device with increased impact energy e.g. for measurements on heavy castings and forged parts. Measurement only in the Brinell range up to 650 HB. The requirements on the surface are not as exte
|
HT-BAQ-21-125-EN
|
|
$2,365.00
|
|
Connection cable for dynaROCK II Impact Device
|
HT-BAQ-R-RP-KABEL-EN
|
|
$225.00
|
|
Set of support rings for convex and concave surfaces, 12 pieces
|
HT-BAQ-21-110-EN
|
|
$465.00
|
|
Impact Body type G
|
HT-BAQ-R-RP-SK-G-EN
|
|
$500.00
|
|
Impact Body type DL
|
HT-BAQ-R-RP-SK-DL-EN
|
|
$500.00
|
|
Impact Body type D
|
HT-BAQ-R-RP-SK-D-EN
|
|
$225.00
|
|
Test Block for Leeb Hardness Tester - 3.5"x2.2" (90x55mm) Diameter, 6 lbs. (2.73kg); Engraved hardness scales: HLD, HLDL, HLD+15, HLC; Possible hardness values: 530 +/- 40HLD, 630 +/- 40HLD, 790 +/- 40HLD
|
HT-BAQ-HVP-HLD-EN
|
|
$430.00
|
|
Test Block for Leeb Hardness Tester with DKD/MPA-Certificate - 3.5"x2.2" (90x55mm) Diameter, 6 lbs. (2.73kg); Engraved hardness scales: HLD, HLDL, HLD+15, HLC; Possible hardness values: 530 +/- 40HLD, 630 +/- 40HLD, 790 +/- 40HLD
|
HT-BAQ-HVP-HLD-Z-EN
|
|
$630.00
|
|
Test Block for Leeb Hardness Tester - 4.7"x2.8" (120x70mm) Diameter, 13.6 lbs. (6.17kg); Possible hardness values: 500 +/- 40HLG, 590 +/- 40HLG
|
HT-BAQ-HVP-HLG-EN
|
|
$515.00
|
|
Test Block for Leeb Hardness Tester with DKD/MPA-Certificate - 4.7"x2.8" (120x70mm) Diameter, 13.6 lbs. (6.17kg); Possible hardness values: 500 +/- 40HLG, 590 +/- 40HLG
|
HT-BAQ-HVP-HLG-Z-EN
|
|
$715.00
|
|
USB Charger for Hardness Tester dynaROCK II including cable
|
HT-BAQ-21-130-EN
|
|
$160.00
|
|