ElektroPhysik MiniTest 700 Series with SIDSP

ElektroPhysik MiniTest 700 Series with SIDSP

ElektroPhysik MiniTest 700 Series with SIDSP Technology

The MiniTest 700 Series has replaced the eXacto Series!

ElektroPhysik's SIDSP® digital sensor technology platform features the industries' highest level of accuracy, repeatability and low end resolution because the actual measurement is completely processed at the point of measurement.

With ElektroPhysik's SIDSP® digital technology sensors, the complete thickness value is calculated at the actual point of measurement, in the sensor where it touches the coating. Only the completely analyzed and processed digital coating thickness value is transmitted through the wires, not an analog signal.

ElektroPhysik's new generation of SIDSP® digital technology sensors all go through a rigorous proprietary manufacturing process that involves up to 50 calibration points per sensor. During the sensor manufacturing process, each sensor is also encoded with individual “temperature compensation”, which means common temperature related conditions and changes will not affect the reading.

In addition to SIDSP® technology, the new ElektroPhysik MiniTest 700 Series features an all new ergonomic design, with features like interchangeable probe sensors, Bluetooth and USB interfaces and automatic substrate recognition. The MiniTest 745 easily converts from a built-in integral probe design to a probe on cable, simply by changing out the probe cartridge.

The MiniTest 700 Series is rounded out with 3 distinct models, each available as a dedicated ferrous, non-ferrous or dual purpose model.

  • The MiniTest 725 - Measuring device with integrated sensor
  • The MiniTest 735 - Sensor connected by cable to the measuring device.
  • The MiniTest 745 - The sensor can be optionally plugged into the device (equivalent of an integrated sensor), connected by cable to the device or connected wirelessly via Bluetooth to the device.


All models include a comprehensive statistics package which includes batch statistics, user selectable high and low limit settings with visual and audible alarms and an IrDA 1.0 transmission data port. A new 180º rotatable display, allows for easy viewing regardless of what position you find yourself in while taking readings.

The MiniTest 700 Series has two measurement modes in which you can use to collect and save measurements. In single mode, up to 70 measuring values per minute can be recorded and saved and in continuous mode up to 20 coating thickness values can be calculated per second. In continuous mode you can determine the thinnest or thickest spot and then save the readings in a series of measurements. The MiniTest 725 and 735 can save up to 10,000 measurement values and 100,000 measurement values in the MiniTest 745. The measurement data saved in the MiniTest 725 / 735 / 745 devices can be transferred by USB or Bluetooth to PCs, tablets or smart phones. This enables you to record measurement values on site and evaluate and archive them at a later point in time.

ElektroPhysik has incorporated various measuring modes that are all user selectable and cover various applications from spot check requirements to ultra accurate measurement modes including surface roughness compensation.

 

MiniTest 725 Series with Built-in Internal Probe

All the models feature:

  • SIDSP
  • Integral Probe Design
  • Type II Gauge
  • Flip LCD Display with menu driven operation
  • Dual Display in both Imperial and Metric measurements
  • ±0.5% tolerance
  • Built-in Statistics
  • Bluetooth and USB Interfaces
  • Control Standards
  • Instructions
  • Batteries
  • Storage Case

 

MiniTest 735 Series with An External Probe On Lead

All the models feature:

  • SIDSP
  • Integral Probe Design
  • Type II Gauge
  • Flip LCD Display with menu driven operation
  • Dual Display in both Imperial and Metric measurements
  • ±0.5% tolerance
  • Built-in Statistics
  • Bluetooth and USB Interfaces
  • Control Standards
  • Instructions
  • Batteries
  • Storage Case

 

MiniTest 745 Series with User Configurable Sensors

MinTest 745 models features ElektroPhysik's Digital Sensor System with SIDSP®, that facilitate user configurable probe configurations for built-in sensor style to a sensor on a lead with quick change over, with sensor lead and cartridge supplied. For that reason the ElektroPhysik MiniTest 745 and the SIDSP® Digital Sensor are offered separately. Choose one or more of the SIDSP® Digital Sensors to your system. Additional SIDSP® Digital Sensors can be added at any time without special configuration.

Features:

  • SIDSP
  • Integral Probe Design
  • Type II Gauge
  • Flip LCD Display with menu driven operation
  • Dual Display with both Metric and Imperial measurements
  • ±0.5% Tolerance
  • Built-in Statistics
  • Bluetooth and USB Interfaces
  • Control Standards
  • Instructions
  • Batteries
  • Storage Case

 

Click on the Link to see a list of all possible probes that can be used with the MiniTest 700 Series

MiniTest Probes

 

Specifications:


MiniTest 725 MiniTest 735 MiniTest 745
Sensor embodiment: fixed internal, non-changeable external, connected via cable internal / external changeable
No. of measurement series: 10 10 100
Measurement memory: 10,000 10,000 100,000
Statistical functions: Number of readings
Minimum / Maximum / Mean Value
Standard deviation
Coefficient of variation
Single value statistics
Block statistics (standard or free configurable)
Calibration: Factory calibration
1-point calibration (zero), 2-point, 3-point calibration
Special calibration method for rough substrates
Adjustable offset
Additional calibration procedures accprding to international standards: ISO 19840:2004(E)
SSPC-PA 2
SS 184160
AS 3894.3
Limit Monitoring: Optical and acoustical signaling
Measurement Units: Imperial: mils, inch, thou
Metric: µm, mm, cm
Data Interface: Bluetooth® 4.0
Bluetooth Smart®
Mini-USB
Printer: Standard ASCII printer
Wireless ElektroPhysik printer
International Standards: DIN EN ISO 1461
DIN EN ISO 2064
DIN EN ISO 2178
DIN EN ISO 2360
DIN EN ISO 2808
DIN EN ISO 3882
ISO 19840
ASTM B 244
ASTM B 499
ASTM D 7091
ASTM E 376
AS 3894.3
SS 184160
SSPC-PA 2
Display: graphics display, adjustable lighting
Power Supply: 2 AA batteries / LR-06 / Mignon or rechargeable NiMH cells AA / HR6
Operating Temperature: 14°F - 140°F / -10°C - 60°C
Storage Temperature: -4°F - 158°F / -20°C - 70°C
Dimensions: 6.18" x 2.97" x 1.93" / 157 x 75.5 x 49 mm
Weight: 6.2 oz. / 175 g. 7.4 oz. / 210 g. 6.2 oz. / 175 g.
Description Part # Saved Price Select Option Add to
MiniTest 725 with built-in internal probe and SIDSP digital sensor technology CT-EP-MINI-725 Request Pricing
MiniTest 735 with External probe On Lead and SIDSP digital sensor technology CT-EP-MINI-735 Request Pricing
MiniTest 745 With User Configurable Sensors CT-EP-MINI-745 Request Pricing
Software & Cable CT-EP-MIN-022090 Request Pricing