PosiTector 6000 - Thick Range Probes

PosiTector 6000 - Thick Range Probes

Coating Thickness Probes for THICK Protective Coatings

Coating Thickness Probes for Thick Protective Coatings

DeFelsko supplies a full range of probe offerings for coating professionals. Recent additions have increased the selection of the PosiTector probes for measuring thick applications such as epoxy, rubber, concrete liners, intumescent fireproofing, high temperatures, duplex coatings, thick intumescent paints and more.

Click Here to Learn More about the PosiTector 6000 All Purpose Gauge

High-Range Probes

Ideal for thick protective coatings such as epoxy, rubber, concrete liners, intumescent fireproofing and more.

FT, FTS, FTRS, FNTS Models

Range: 0-250 mils, 0-6 mm (0-6000 µm)

FKS, NKS

Range: 0-500 mils, 0-13 mm

FHXS Xtreme

Measure non-conductive coatings on steel substrates. Probe with Alumina wear face and braided cable for hot or rough surfaces up to 250° C (500° F).Compatible with PosiTector bodies with serial numbers greater than 700,000 and the new PosiTector SmartLink.

Range: 0-400 mils (0-10,000 µm)

FJS High-Range

Ideal for measuring thick epoxies, rubbers, fireproofing and other thick protective coatings applied to steel. Lightweight, ergonomic design - 66% smaller than comparable probes. Electro-magnetic probe is less susceptible to the effects of substrate roughness, curvature, material, and alloy.

Range: 0-1.0 in, 0-25 mm

FLS High-Range

Measures intumescent paint and other thick protective coatings on steel. Measures up to 38 mm (1.5 inches). Braided stainless steel cable - kink-proof, wear and cut resistant. Includes hard shell case and 19 mm (750 mil) shim. Compatible with PosiTector bodies with serial numbers greater than 700,000 and the new PosiTector SmartLink.

Range: 0-38 mm, 0-1.5 in

FNGS Ultra High-Range

Measures very thick coatings non-conductive coatings on both ferrous and non-ferrous metal substrates. Ideal for measuring ship hull coatings and thick intumescent paints. Measures up to 63.5 mm (2.5 inches). Braided stainless steel cable - kink-proof, wear and cut resistant. Long-lasting, low wear probe face to facilitate scanning of large surfaces. Includes a handle for easy one-handed operation. Compatible with PosiTector bodies with serial numbers greater than 700,000 and the new PosiTector SmartLink.

Range:  0-63.5 mm, 0-2.5 in

FNDS Duplex Coatings Probe

The PosiTector 6000 FNDS probe measures the individual thicknesses of both the paint and the zinc layers in a duplex coating system with a single reading. In Duplex mode, the PosiTector 6000 FNDS utilizes both magnetic (ferrous) and eddy current (non-ferrous) principles simultaneously to calculate and display the individual paint and zinc layer thicknesses. The magnetic principle is used to measure the combined paint/zinc thickness over the ferrous substrate, and the eddy current principle is used to measure the paint thickness over the non-ferrous zinc coating. The zinc thickness is calculated by subtracting the paint thickness from the combined paint/zinc thickness measurement. Compatible with PosiTector Advanced (serial numbers 730,000+) and PosiTector Standard gage bodies with a color display. A gage update may be required.

Range: 0-60 mils (0-1500 µm)

Technical Specifications

Thick Coating Probes Specifications & Comparison

Probe Diagram Type Metal Range Accuracy Min Surface Area Min Substrate Thickness
FT Integral Ferrous

0-250 mils
0-6 mm

±(0.05 mils +1%) 0-100 mils
±(0.5 mils + 3%) > 100 mils

±(0.01 mm +1%) 0-2.5 mm
±(0.01 mm +3%) >2.5 mm

N/A

 N/A
FTS Cabled N/A N/A
FTRS 90° Cabled N/A N/A
FNTS Cabled Combination N/A N/A
FKS Cabled Ferrous

0-500 mils
0-13 mm

±(1 mils + 3%)
±(0.02 mm +3%)

N/A

 N/A
NKS Cabled Non-Ferrous N/A N/A
FHXS High Temp Cabled Ferrous

0-400 mils
0-10000 μm

±(0.1 mils + 3%)
±(2 μm +3%)

N/A

 N/A
FJS Cabled Ferrous

0-1.0"
0-25mm

±(0.1 mils + 3%)
±(0.2 μm +3%)

N/A

 N/A
FLS Cabled Ferrous

0-1.5"
0-38 mm

±(0.01 mils + 3%)
±(0.2 μm +3%)

3.25" x 3.25"
83 x 83 mm

0.1"
2.5 mm
FNGS 0.8 lb. Cabled Combination

0-2.5"
0-63.5 mm

±(0.01 mils + 3%)
±(0.2 mm +3%)

10" x 10"
254 x 254 mm

0.2"
5 mm
FNDS Duplex Cabled Combination

0-60 mils
0-1500 μm

See below chart

 N/A N/A
Duplex Coating (FNDS) Specifications
Minimum Zinc Thickness 0.5 mil (13 μm)
Paint Layer Accuracy Mils ± (0.05 mils + 1%) 0-2 mils
± (0.1 mils + 1%) > 2 mils
Microns ± (1 μm + 1%) 0-50 μm
± (2 μm + 1%) > 50 μm
Zinc Layer Accuracy Mils ± (0.1 mils + 1%) 0.5-2 mils
± (0.2 mils + 1%) > 2 mils
Microns ± (2 μm + 1%) 13-50 μm
± (4 μm + 1%) > 50 μm

Product Literature

Description Part # Saved Price Select Option Add to

Ferrous Models
DeFelsko FT1 / FT3 Positector 6000 (0-250 mils/0-6 mm), Thick Coatings Integral Probe Thickness Gage for Ferrous Materials (Specify Standard or Advanced Gage Body)
Model #
CT-DF-FT-Master
$835.00
DeFelsko FTS1 / FTS3 Positector 6000 (0-250mils/0-6mm), Thick Coating Regular Cable Probe Thickness Gage for Ferrous Materials (Specify Standard or Advanced Gage Body)
Model #
CT-DF-FTS-Master
$945.00
DeFelsko FTRS1 / FTRS3 Positector 6000 (0-250 mils/0-6 mm), Thick Coating 90 Degree Cable Probe Thickness Gage for Ferrous Materials (Specify Standard or Advanced Gage Body)
Model #
CT-DF-FTRS-Master
$1,010.00
DeFelsko FHXS1 / FHXS3 Positector 6000 (0-400 mils/0-10000 um), Thick Coating Cable Probe Thickness Gage for Ferrous Materials (Specify Standard or Advanced Gage Body)
Model #
CT-DF-FHXS-Master
$1,460.00
DeFelsko FJS1 / FJS3 Positector 6000 (0-1.0"/0-25mm), Thick Coating Cable Probe Thickness Gage for Ferrous Materials (Specify Standard or Advanced Gage Body)
Model #
CT-DF-FJS-Master
$1,350.00
DeFelsko FKS1 / FKS3 Positector 6000 (0-500 mils/0-13mm), Thick Coating Regular Cabled Probe Thickness Gage for Ferrous Materials (Specify Standard or Advanced Gage Body)
Model #
CT-DF-FKS-Master
$1,010.00
DeFelsko FLS1 / FLS3 Positector 6000 (0-1.5"/0-38 mm), Thick Coating Cable Probe Thickness Gage for Ferrous Materials (Specify Standard or Advanced Gage Body)
Model #
CT-DF-FLS-Master
$1,585.00
DeFelsko PosiTector 6000 FLS Probe Only CT-DF-FLS
$1,235.00

Non-Ferrous Models
DeFelsko NAS1 / NAS3 Positector 6000 (0-25 mils/0-625 um), Ideal for Anodized Aluminum, Cable Probe Thickness Gage for Non-Ferrous Materials (Specify Standard or Advanced Gage Body)
Model #
CT-DF-NAS-Master
$1,120.00
DeFelsko NKS1 / NKS3 Positector 6000 (0-500 mils/0-13mm), Thick Coating Regular Cable Probe Thickness Gage for Non-Ferrous Materials (Specify Standard or Advanced Gage Body)
Model #
CT-DF-NKS-Master
$1,030.00

Combination Models
DeFelsko FNTS1 / FNTS3 Positector 6000 (0 - 250 mils), Thick Coating Regular Cable Probe Thickness Gage for Combination Materials (Specify Standard or Advanced Gage Body)
Model #
CT-DF-FNTS-Master
$1,350.00
DeFelsko FNDS1 / FNDS3 Positector 6000 (0-60 mils/0-1500 um), Ideal for Duplex Coatings, Thick Coating Regular Cable Probe Thickness Gage for Combination Materials (Specify Standard or Advanced Gage Body)
Model #
CT-DF-FNDS-Master
$1,375.00
DeFelsko FNGS1 / FNGS3 Positector 6000 (0-2.5"/0-63.5 mm), Thick Coating Regular Cable Probe Thickness Gage for Combination Materials (Specify Standard or Advanced Gage Body)
Model #
CT-DF-FNGS-Master
$1,865.00