Clark Hardness Testers CRX Series Standard Digital

Clark Hardness Testers CRX Series Standard Digital

CLARK CRX Series Rockwell type Hardness Testers

Note: The CR series (CR-1e, CR-1, CR-2e, CR-2, CR-3e & CR-3) Rockwell Hardness Testers have been upgraded to the new CRX series (CRX-1e, CRX-1, CRX-2e, CRX-2, CRX-3e & CRX-3).

The CRX Series are sleek and durable Rockwell Type Hardness testers that are built for high volume testing with precise accuracy. Available in standard, superficial and twin models, the CRX Series can accommodate many testing requirements.

Features:

  • Hardness conversion display for many scales are displayed on the panel in compliance with ASTM (E-140),
  • Upper and lower limits capability and HI / OK / LO display
  • Plastic measurement mode comes standard - Specific measuring method for plastic in compliance with ASTM is activated by one-touch operation.
  • Steady load spindle mechanism for measuring spherical surface - Two ball guides are adopted on upper and lower parts of the load spindle, providing constant and accurate measurement on cylindrical and spherical surface.
  • Easy "zero" setting with electric sound
  • Automatic and manual start loading - In "AUTO" measuring mode, the test load is automatically applied once the minor load has been set (290.0 to 299.9 on the digital display). Automatic load application does not start if the minor load exceeds the range (over 300.0 on the digital display).
  • One piece, heavy duty cast housing enclosing all internal parts
  • Calculates the average value
  • Round and spherical work correction settings
  • LED light
  • RS-232C Output as standard - RS-232C output is provided for computer or printer capabilities.
  • Simple, easy-to-use operation - For convenience, all test conditions (measuring scale, dwell time, conversion scale, etc.) can be easily accessed on the durable front membrane operation panel.
  • Certified and ready to use


Standard Accessories:

CRX-1e / CRX-1 CRX-2e / CRX-2 CRX-3e / CRX-3
Hardness Standard - HRC 1
1
Hardness Standard - HRB 1
1
Hardness Standard - HR30N
1 1
Hardness Standard - HR30T
1 1
Diamond Indenter 1"C" 1 "N" 1 "C", 1 "N"
1/16" Carbide Ball Indenter 1 1 1
1/16" Carbide Balls Indenter 4 4 4
Anvil - 21/2" Flat 1 1 1
Anvil - 11/2" V-Shape 1 1 1
Each come with a machine cover, accessory box, manual and leveling leg set as standard.

Specifications:

CRX-1e / CRX-1 CRX-2e / CRX-2 CRX-3e / CRX-3
Minor Load: 10 kgf (98.07 N) 3 kgf (29.42 N) 3 kgf (29.42 N) / 10 kgf (98.07 N)
Test Load: 60 - 100 - 150 kgf
(588.4 - 980.7 - 1471 N)
15 - 30 - 45 kgf
(147.1 - 294.2 - 441.3 N)
15 - 30 - 45 kgf
(147.1 - 294.2 - 441.3 N)
60 - 100 - 150 kgf
(588.4 - 980.7 - 1471 N)
Minor Load Position Setting: Automatic setting (electronic sound monitoring).
Load Control: Automatic (application - holding - release)
Dwell Time: 1 - 999 seconds (key entry in units of seconds)
Plastic Measurement: Standard function (one-touch selection), time up to hardness value display after release: 1 - 999 seconds
Hardness Conversion: Hardness conversion capable in compliance with ASTM (E-140)
OK / NG Criteria: Upper and lower limits setting and HI/OK/LO display (HR 0 to 130, min. 0.1 hardness increments)
Scale Display: C, D, A, G,
B, F, K, E,
H, P, M, L,
V, S, R
15N, 30N, 45N,
15T, 30T, 45T,
15W, 30W, 45W,
15X, 30X, 45X,
15Y, 30Y, 45Y
C, D, A , G, B, F, K, E
H, P, M, L, V, S, R,
15N, 30N, 45N,
15T, 30T, 45T,
15W, 30W, 45W
15X, 30X, 45X,
15Y, 30Y, 45Y
Ouput Signal: RS-232C (Baud rate: 9600 bps)
RS-232 Output & Printout Modes: 1 - Measurement data only
2 - Measurement data only and evaluation results (max. value, min. value & OK/NG)
3 - Measurement data and conversion data
4 - Measurement data, conversion data and evaluation results (max. value, min. value & OK/NG)
5 - Measurement data and average value
6 - Maximum depth of indenter and measurement data
Maximum Specimen Height: 10" (255mm) / 17" (435mm) 10" (255mm) / 17" (435mm) 8.5" (225mm) / 15" (405mm)
Maximum Specimen Depth: 6.5" (165mm) 6.5" (165mm) 6.5" (165mm)
Dimensions: 7.7" x 19.2" x 32.3" / 38" (196 x 487 x 820 / 965 mm)
Weight: Approx. 190lbs. (87kg) Approx. 190 lbs. (87kg) Approx. 200 lbs. (88 kg)
Power Supply: Single Phase 115 VAC / AC 100 - 240V, 50/60 Hz


Product Literature

Description Part # Saved Price Select Option Add to
CRX-1 Standard Rockwell Type Tester HT-CR-CRX-1 Request Pricing
CRX-1e Reduced Height Regular Rockwell Type Tester HT-CR-CRX-1E Request Pricing
CRX-2 Superficial Rockwell Type Tester HT-CR-CRX-2 Request Pricing
CRX-2e Reduced Height Superficial Rockwell Type Tester HT-CR-CRX-2E Request Pricing
CRX-3 Twin Rockwell Type Tester HT-CR-CRX-3 Request Pricing
CRX-3e Reduced Height Twin Tester HT-CR-CRX-3E Request Pricing