FlawTech ASME Flaw Test Samples
FLAW TECH – ASME KITS
Section XI Appendix VIII, Supplement 2, 3 and 10 Kits for Austenitic Piping, Ferritic Piping and Dissimilar Metal Welds
Supplement 2: Austenitic Piping (Stainless Steel) Kit Includes:
- Stainless Steel Welded Piping (2" Sch80 x 24"L x 360° Seg.); 1 Unflawed Unit, 1 Flawed Unit
- Stainless Steel Welded Piping (4" Sch80 x 24"L x 360° Seg.); 3 Unflawed Units, 1 Flawed Unit
- Stainless Steel Welded Piping (6" Sch160 x 24"L x 360° Seg.); 4 Unflawed Units, 2 Flawed Units
- Stainless Welded Piping (12" Sch80s x 24"L x 360° Seg.); 9 Unflawed Units, 3 Flawed Units
- Stainless Steel Welded Piping (24" Sch80s x 24"L x 120° Seg.); 5 Unflawed Units, 3 Flawed Units
Kit Totals: 5 Specimens; 22 Unflawed Units, 10 Flawed Units
Supplement 3: Ferritic Piping (Carbon Steel) Kit Includes:
- Carbon Steel Welded Piping (2" Sch80 x 24"L x 360° Seg.); 1 Unflawed Unit, 1 Flawed Unit
- Carbon Steel Welded Piping (4" Sch80 x 24"L x 360° Seg.); 3 Unflawed Units, 1 Flawed Unit
- Carbon Steel Welded Piping (6" Sch160 x 24"L x 360° Seg.); 4 Unflawed Units, 2 Flawed Units
- Carbon Welded Piping (12" Sch80s x 24"L x 360° Seg.); 9 Unflawed Units, 3 Flawed Units
- Carbon Steel Welded Piping (24" Sch80s x 24"L x 120° Seg.); 5 Unflawed Units, 3 Flawed Units
Kit Totals: 5 Specimen; 22 Unflawed Units, 10 Flawed Units
Supplement 10: Dissimilar Metal Welds (Carbon Steel & Stainless Steel) Kit Includes:
- SS/CS Welded Piping (4" Sch80 x 24"L x 360° Seg.); I Unflawed Unit, 2 Flawed Units
- SS/CS Welded Piping (6" Sch160 x 24"L x 360° Seg.); 3 Unflawed Units, 2 Flawed Units
- SS/CS Welded Piping (8 Sch80 x 24"L x 360° Seg.); 4 Unflawed Units, 3 Flawed Units
- SS/CS Welded Piping (12" Sch80s x 24"L x 180° Seg.); 9 Unflawed Units, 4 Flawed Units
- SS/CS Welded Piping (24" Sch80s x 24"L x 90° Seg.); 5 Unflawed Units, 4 Flawed Units
Kit Totals: 5 Specimen; 22 Unflawed Units, 15 Flawed Units
General Specifications:
- The kits are manufactured to meet the minimum requirements of ASME boiler & pressure vessel code, Section XI, Appendix VIII, of Supplement 2, 3 & 10.
- At least 50% of the cracks will be coincident with fabricated conditions such as ground & "as-welded" crowns, counterbores & weld root conditions.
- Flaw depths will range from the 10 - 30% through the 61 - 100% depth ranges as specified in ASME Section XI, Appendix VIII.
- All flaws will be mechanical fatigue or thermal fatigue cracks with at least 75% of the cracks being thermal fatigue.
- Critical tolerance: +/- 0.040" (1MM)
- Weight: Supplement 2: 360 lbs.; Supplement 3: 350 lbs.; Supplement 10: 340 lbs. (due to weight, special shipping considerations apply).
