SE Inspector Series

SE Inspector Series

Note: This product has been discontinued, the replacement is:

SE Ranger Series Digital Radiation Alert Meters

SE Inspector Series Handheld Digital Radiation Alert® Detectors

se-inspector-exp se inspector usb se-inspector-usb-extreme


The Inspector Series features built-in isotope efficiencies, data collection, great sensitivity, backlit display, timer and optional wipe test plate for swipes.

Three Different Models:

Inspector USB
Inspector Xtreme USB
Inspector EXP

 

Inspector USB

  • The inspector USB offers excellent sensitivity to low levels of alpha, beta, gamma, X-ray and built-in efficiencies for common isotopes to calculate activity in Bequerels and DPM.
  • USB and Observer USB Software included so you can download your data from the internal memory, set computer alarms and calibrate your instrument.
se-inspector-usb

 

 


Inspector Xtreme USB

  • Ruggedized, easy to use and ready to go. The tough overlay and solid back panel give you added protection for taking your radiation survey meter out in the field.
  • USB and Observer USB Software included so you can download your data from the internal memory, set computer alarms and calibrate your instrument.
se-inspector-usb-extrem

 

 

Inspector EXP

  • The Inspector EXP delivers the same quality you have come to expect from the Inspector USB with the added versatility of an external probe.
  • Comes with a carrying case that has a clear window panel providing full view of the readout, count light, access to the switches and convenient hand straps and belt loop are provided for carrying the instrument.
  • Unique design of attaching the probe to the carrying case allows for one-handed operation.
se-inspector-exp

 

se-inspector-exp se-inspector-exp


Specifications:

  Inspector USB & Xtreme USB Inspector EXP
Detector: Internal Halogen-quenched uncompensated GM tube with thin mica window, 1.4 - 2.0 mg/cm2 areal density. Effective diameter window is 45 mm (1.77"). Radiation symbol on front label marks the center of the detector.
Operating Range: mR/hr - .001 to (1µR) to 100
CPM - 0 - 350,000
µSv/hr - .01 - 1,000
CPS - 0 to 5,000
Total / Timer - 1 to 9,999,000 counts
Accuracy (referenced to Cs137)
Typically ± 15% from factory, ± 10% with NIST source Calibration.
Energy Sensitivity: 3340 CPM / mR/hr (Cs137)
Detects Alpha down to 2 MeV.
Detects Beta down to .016 MeV; typical detection efficiency at 1 MeV is approximately 25%.
Detects Gamma down to 10 keV through the end window.
Smallest detectable level for I125 is .02 µCi at contact.
Built-in Efficiencies: Sulfar (S35), Strontium (Sr/y90), Cesium (Cs137), Phosphorous (P32), Carbon (C14), Iodine (I131), Cobalt (Co60) and Alpha.
Selectable Alert Set Range: mR/hr - .001 to 50 and CPM - 1 to 160,000. 70db @ 1m. Pulsating beeper sound the alert. Adjustable alert levels are used for mR/hr / CPM and µSv/hr / CPS. Alarm will sound when in Timer Mode when set alarm threshold is reached.
Anti-Saturation: Meter will hold at OVER RANGE in fields as high as 100 times the maximum reading.
Averaging Periods: Display updates every 3 seconds. At low background, the update is the average for the past 30 second time period. The timed period for the average decreases as the radiation level increases.
Display: Backlit 4 digit liquid crystal display with indicators. Display updates every 3 seconds.
Count Light: Red LED flashes with each radiation event.
Audio Indicator: Internally mounted beeper (can be switched off for silent operation).
Outputs: 3.5 mm jack for CMOS or TTL devices and counts to a computer or datalogger. USB for use with FREE Observer USB Software for PCs.
Temperature Range: -10°C - 50°C (14°F - 122°F)
Power Requirements: One 9-volt alkaline battery or USB - AC Adapter. Battery life is approximately 2,000 hours at normal background. One 9-volt alkaline battery. Battery life is approximately 2160 hours at normal background.
Weight: Inspector USB: 273 grams (9.6 oz.) without battery.
Inspector Xtreme USB: 454 grams (16 oz.) without battery.
Inspector EXP: 635 grams (22.4 oz.)
Dimensions: Inspector USB: 150mm x 80mm x 30mm (5.9" x 3.1" x 1.2")

Inspector Xtreme USB:
150mm x 80mm x 30mm (5.9" x 3.1" x 1.2")
Inspector EXP: 150mm x 80m x 30mm
(5.9" x 3.1" x 1.2")


Probe: 270mm x 70mm x 25mm (10.25" x 2.75" x 1.0")
Probe Construction: Built-in Probe Anondized aluminum housing
Size:
approx. 8.75" (22.23 cm)
Diameter: 2.75" (7.0 cm)
Connector: BNC
Handle: Black foam grip
Includes: Inspector USB: Carrying Case, Certificate of Conformity, USB Cable and Observer USB Software.
Inspector Xtreme USB: Xtreme Boot, Carrying Case, Certificate of Conformity, USB Cable and Observer USB Software.
Carrying Case, Observer USB Software Download, USB Cable and Certificate of Conformity
Options: Xtreme Boot, Wipe Test Plate and Stand Serial Observer Software
Limited Warranty: 1 year limited warranty
90 day limited warranty on GM tube
1 year limited warranty

Product Literature

Description Part # Saved Price Select Option Add to
SE Inspector USB RS-SE-INSPECTOR-USB Discontinued Item
SE Inspector Xtreme USB RS-SE-INSPECTOR-XTREME-USB Discontinued Item
SE Inspector EXP Includes the Inspector with external pancake probe and cable RS-SE-INSPECTOR-EXP Discontinued Item