Scientific Instruments' QB-2 Plus measures the duration of the magnetizing shot and provides a quantitative verification of the Quick Break function. Both shot time and Quick Break voltage are shown on the LCD Display after each shot event.
The QB-2 Plus can accurately verify the correct shot duration of AC, HWDC and FWDC equipment, and verify the Quick Break function on single phase and 3-phase FWDC units. The QB-2 probe is placed inside the coil (on in line with the cable wrap) during a magnetizing shot. Quick Break voltage and shot time are captured and displayed on the LCD display. Using the QB-2 Plus will help ensure residual field is properly developed during processing and gives sharper resolution of transverse indications.
| Power Source | 9 Volt Battery |
| Shot Timer Accuracy | 1% of reading +/- 2 counts |
| Shot Time Resolution | .01 seconds |
| Shot Time Range | .20 to 2.80 seconds |
| Quick Break Accuracy | 1% of reading +/- 2 counts |
| Quick Break Resolution | .01 Volts |
| Operating Temperature | 32° - 104°F (0° - 40°C) |
| Cable Length | 6 ft. |
| Dimensions | 10" x 4" x 2" (254 x 101.6 x 50.8 mm) |
| Weight | 2 lbs. (0.91 kg) |
| Compliance | Meets ASTM E709, ASTM E1444, ASTM E3024 |