CR Phantom is used to test all relevant parameters of CR Scanner systems including basic spatial resolution, unsharpness, contrast, MTF, laser beam jitter, scanner slipping and shading. These tests are performed periodically according to ASTM E 2445-14, ISO 16371-1 and EN 14784-1 standards.
The Kowotest CR Phantom exceeds these standards by including two Duplex wire type IQIs. Measuring points for shading correction are arranged in both axis directions – panorama and landscape. All required information is mapped on the image plate with a single X-ray exposure so there is no need to rotate the CR Phantom to receive information from the second axis. This results in more accurate test scores and significant time savings.
Two Duplex IQI's available: D13 (Standard Resolution) and D15 (High Resolution)
(Letters refer to the diagram on the right)
Test Material | Application | |
A | T-Target – Brass | Laser beam jitter, MTF check, Blooming (Flare) |
B | Duplex Wire Type IQI | Basic Spatial Resolution, Unsharpness |
C | BAM Snail | Central Beam Alignment |
D | Converging Line Pair IQI | Line Pair Resolution |
E | EL, EC, ER Measuring Points | Shading Correction |
F | Cassette Positioning Locator | Position of Cassette (Image Plate) |
G | Homogeneous AL Strip | Scanner Slipping, Shading |
H | Lucite Plate | Carrier Plate |
J | Contrast Sensitivity Gauge | Contrast Sensitivity Check |
Dimensions
14 x 17 x 0.75" (350 x 430 x 19 mm)
The D15 has same wire pairs as the D13 + additional wires with diameters of: