PH Tool Phased Array "Type A" Block (IIW-Type)

PH Tool Phased Array "Type A" Block (IIW-Type)

Overview

The Phased Array "Type A" Calibration Block is used during the initial setup and calibration of a phased array ultrasonic unit. This block can be used to perform tasks such as beam angle verification, calibration for wedge delay, sensitivity calibration, performing DAC/TCG and more. This block has similar dimensions to a IIW-Type Block, but has specially-engineered for phased array applications.

Geometry:

  • Inch Dimensions: 1.000" thick x 4.000" tall x 12.00" long
  • Metric Dimensions: 25.0mm thick x 100.0mm tall x 300.0mm long

 

 

Inch Version Features:

  • 4.000" and 2.000" radii
  • 19 through holes at 0.040" diameter
  • 1 through hole at 0.080" diameter
  • 4 FBHs at 0.080" diameter x 0.080", 0.160", 0.235" and 0.315" deep
  • 4 FBHs at 0.157" diameter x 0.040", 0.120", 0.200" abd 0.275" deep
  • 3 FBHs at 0.080" diameter x 0.120" deep machined into the 2.000" radius
  • 4 EDM notches at 0.004", 0.008", 0.012" and 0.016" deep x 0.020" wide x 1.00" long.

 

 

Metric Version Features:

  • 100.0 mm and 50.0m radii
  • 19 through holes at 1.0mm diameter
  • 1 through hole at 2.0mm diameter
  • 4 FBHs at 2.0mm diameter x 2.0mm, 4.0mm, 6.0mm and 8.0mm deep
  • 4 FBHs at 4.0mm diameter x 1.0mm, 3.0mm, 5.0mm and 7.0mm deep
  • 3 FBHs at 2.0mm diameter x 3.0mm deep machined into the 50mm radius
  • 4 EDM notches at 0.1mm, 0.2mm, 0.3mm and 0.4mm deep x 0.5mm wide x 25.0mm long.

Materials

Standard Materials

  • 1018 Carbon Steel
  • 7075-T6 Aluminum
  • 304 Stainless Steel
Special Materials (Call for Price)

  • 4340 Steel
  • Titanium
  • 316 Stainless Steel
  • 2024-T3 Aluminum
  • 6061-T6 Aluminum
  • 90/10 Copper Nickel
  • Hastelloy C276
  • Monel 400
  • Hastelloy X
  • 1018 Steel, Nickel Plated
  • A387 Grade 11
  • A387 Grade 22
  • A387 Grade 91
  • A516 Grade 70
  • 321 Stainless Steel
  • AL6XN
  • 2101 Duplex Stainless Steel
  • 2205 Duplex Stainless Steel
  • 6AL-4V Titanium
  • 7050-T7451 Aluminum
  • Brass
  • Brass Alloy 932
  • Copper 110
  • Cast Ductile Iron
  • Cast Gray Iron
  • Zirconium 702
  • Inconel 600
  • Inconel 625

Purchasing Details:

  • Material certification is included with all blocks.
  • Dimensional certification is available at additional cost.
  • If additional certification is required, make sure to select (UT-PHT-PAIIW-Cert) when adding items to the shopping cart.
  • Optional Hardwood Case available upon request
Description Part # Saved Price Select Option Add to
PH Tool Phased Array "Type A" Block (IIW-Type) (select material)
Model #
UT-PHT-PA-TYPA-ICS-Master
$2,392.00
PH Tool Phased Array "Type A" Block (IIW-Type) Metric Version (select material)
Model #
UT-PHT-PA-TYPA-MCS-Master
$2,392.00
PH Tool Wooden Case for Phased Array "Type A" Block (IIW-Type) UT-PHT-PA-TYPA-WC
$109.00
PH Tool Phased Array "Type A" Dimensional Certificate (New Block) UT-PHT-PA-TYPA-CERT
$326.00
PH Tool Phased Array "Type A" Dimensional Certificate (Recertification) UT-PHT-PA-TYPA-RECERT
$652.00