PCWI Compact Pulse Detector - P20 & P40

PCWI Compact Pulse Detector - P20 & P40

PCWI P20, P40, P60

PCWI Compact Pulse Detector


PCWI Compact Pulse Porosity Detectors are fully adjustable and have regulated 'pulsed' output up to 20kV, 40kV. The P20 and P40 models can be used for porosity and holiday testing of carbon impregnated coatings such as carbonated rubber, thick coatings such as rubber linings and on ‘plastic'/fibreglass type coatings, likely to become electrostatically charged.

The P20 & P40 models are ideal for use in moist conditions, on wet and contaminated coating surfaces. Commonly known as holiday detectors, spark testers, porosimeters or jeepers. Proudly These models comply with the requirements of AS3984.1-2002 and Nace Standards: SP0490-2007, RP2074-2004 & SP0188-2006. Manufactured in Australia by PCWI.

Applications:

  • Used for detection of coating porosity (pin-holes, or holidays) in dielectric (insulation type) coatings on conductive substrates, including concrete.
  • Regulated "Pulsed" output fully adjustable


Ideal for Use:

  • On contaminated coating surfaces
  • On carbon-impregnated coatings; ie: carbonated rubber
  • On very thick coatings


Features:

  • Lightweight with ABS case
  • LCD display of voltage
  • Fully adjustable voltage
  • Clip-on battery pack
  • Constant test current
  • Overcharge protection


Industrial Kit comes complete with:

  • Detector with clip-on power pack
  • Universal Charger
  • Probe handle with neon and 7' (2m) cable
  • 2.4" (60mm) connector for flat brushes
  • 23' (7m) earth cable with clamp
  • Fan Brush
  • 10" (250mm) flat brass wire brush
  • 18" (450mm) probe extension
  • Air-operated earphones
  • Should & waist harness
  • Kit case
  • Operating instructions with calibration certificate
  • Battery clip


Pipeline Kit comes complete with:

  • Detector with clip-on power pack
  • Spare clip-on power pack
  • Universal Charger
  • Probe handle with neon and 7' (2m) cable
  • 2.4" (60mm) connector for flat brushes
  • 23' (7m) earth cable with clamp
  • Fan brush
  • Coil joiner with 18" (450mm) probe extension
  • Air-operated earphones
  • Should & waist harness
  • Kit case
  • Operating instructions with calibration certificate
  • Battery clip


Controls:

  • LCD display
  • On / Battery condition indicator light
  • Visual alarm indicates when fault is found
  • Voltage Up
  • Voltage Down
  • Off
  • On
  • Audible alarm when fault is found
  • Earphone (connected on opposite side)
  • Fuse (4A slow blow) 0.2" x 0.8" (5 x 20mm)
  • Earth connection point
  • Alarm sensitivity 'wet' or 'dry' conditions (located in the battery compartment)
  • Charge connector
  • Clip-on battery pack
dc-compact-porosity-pulsed-detector-control-panel

dc-compact-pulsed-porosity-detector-control-layout

Optional Accessories:

  • High Voltage Pulse Crest Meter
  • Flat Brushes
  • External Rolling Pipeline Brushes
  • Internal Pipeline Disc Brushes
  • Internal Pipeline Cone Shapped Brushes

Specifications

P20 Industrial P20 Pipeline P40 Industrial P40 Pipeline
Packed Weight: 18 lbs (8 kg)
Voltage: Displays 0 to 20kV Displays o to 40kV
Resolution: 100V
Alarm Range: 2 to 20kV 5 to 40kV
Short Circuit: 1.5mA max
Power: NiMH 3.3Ah Slide-off
Dimensions: 10.2" x 6.3" x 2.8" (260 x 160 x 70mm)
Alarm: Audible
Probe Handle: Rubber Cable
Battery Condition: LED Indicator

Product Literature

Description Part # Saved Price Add to
Pulsed Industrial Kit (20 KV) CT-PCWI-0940 $2,830.00
Pulsed Pipeline Kit (20 KV) CT-PCWI-0945 $2,830.00
Pulsed Industrial Kit (40 KV) CT-PCWI-0950 $2,950.00
Pulsed Pipeline Kit (40 KV) CT-PCWI-0955 $2,950.00