Parker Research Yoke Lights

Parker Research Yoke Lights

Molded Induction Yoke Lights

Parker Research Induction Molded Yoke Lights

Y300 & Y400 Molded Induction Yoke Lights

The Parker Y-300 and Y-400 Probe Lights are molded inspection lights, designed to fit the B-300 and DA-400 Contour Probes. The lights produce substantial close-in illumination for magnetic testing.

The Parker Probe Lights operate from the induction of the AC magnetic field produced by the Yokes. A small coil wound within the molded light housing produces 12 volts AC, which operates the small cylindrical shaped bulb. There are no wiring connections necessary for installation. It should be noted, that the lights operate in the AC mode only.

The Y-300 Probe Light is designed to fit the rear leg housing of the Parker B-300 Contour Probe, while the Y-400 is designed to fit the rear leg housing of the DA-400 Contour Probe. Both are molded from durable glass filled nylon, which is extremely resistant to shock, wear and chemicals. The bulbs are an automotive dome light bulb, which may be available from local sources. Replacements are also available from Parker at minimal cost.

The Y300 and Y400 Yoke lights are included with no additional cost with the B300 Contour Probe and the DA400 Probe "A" Kits - optional with other kits too.


YP20 Molded Induction Yoke Light

The Parker YP20 Probe Light is a molded Inspection Light designed to fit the P-2 Series Contour Probe. The light produces substantial close-in illumination for magnetic testing.

The Parker light operates from the induction of the AC magnetic field produced by the Yoke. A small coil wound within the molded light housing produces around 12 volts AC, which operates the small cylindrical shaped bulb. There are no wiring connections necessary for installation. It should be noted, that the YP20 operates in the AC mode only.

The YP20 Probe Light is designed to fit in the rear leg housing of the Parker P2 Contour Probe. The light is molded from durable glass filled nylon, which is extremely resistant to shock, wear and chemicals. The bulbs are an automotive dome light bulb, which may be available from local sources. Replacement are available from Parker at minimal cost to you.


Y-200 Molded Inspection Light

The Parker Y-200 Yoke Light is a molded Inspection Light designed to fit the B-200 Contour Probe. The light produces substantial close-in illumination for magnetic testing.

The Parker light operates from the induction of the AC magnetic field produced by the yoke. A small coil wound within the molded light housing produces 12 volts AC which operates the small cylindrical shaped bulb. There are no wiring connections necessary for installation. It should be noted, that the Y-200 operates in the AC mode only.

The Y-200 Probe Light is designed to fit in the rear leg housing of the Parker B-200 Contour Probe. The light is molded from durable glass filled nylon, which is extremely resistant to shock, wear and chemicals. The bulbs are an automotive dome light bulb, which may be available from local sources. Replacement are available from Parker at minimal cost to you.

Note: There is a minimum order fee of $25.00 for orders less than $50.00.

Product Literature

Description Part # Saved Price Add to
Yoke Light (B300) MT-PR-Y300 $39.00
Yoke Light (DA400) MT-PR-Y400 $39.00
Y-200 Yoke Light MT-PR-Y200 $39.00
YP20 Yoke Light (P2) MT-PR-YP20 $39.00
Replacement Bulb MT-PR-Y34B $3.75