DeltaFlux MPI for Turbine Blades

DeltaFlux MPI for Turbine Blades

Wet Fluorescent MPI Bench Built to optimize Turbine Blade inspection

Overview

The DF B 100 AL B TR bench for wet fluorescent MPI on turbine blades. Designed around the part--not just an adapted standard MPI bench. 

Adjacent conductor option is available for smaller blades.

Circular magnetization:

current through the part: A - B / A - C / B- C

Logitudinal Magnetization:

multi-turn coil traveling from pole to pole

Adjacent conductor:

copper bar, no direct pole contact

Features

  • Tilting poles and movable coil cover a broad range of blade types and lengths
  • Modular Aluminum Structure limits residual magnetic field on the structure itself
  • Recorded Parameters Current, demagnetization, UV value and residual field logged on Delta Screen for each cycle
  • Stainless Steel Recovery tanks for containment and recirculation 
  • Tilting system to follow the blade surface,  maintaining electrical contact on irregular profiles
  • One-Touch Set-Up: Clamping and contact no longer depend on the operator: the cycle is repeated automatically

Clamping, Magnetizing Coil & Part Handling

Poles, Contacts & Clamping DF B 100 AL B TR Coil, Rotation & Suspension Application

Both poles are orientable and pneumatically operated, with digital pressure adjustment.

Tilting System Poles tilt to follow the blade surface, maintaining electrical contact on irregular profiles
Contact Heads Tinned copper braid for even current distribution and reduced arcing
Pneumatic Clamping Digitally adjustable closing pressure, repeated identically on every part
One-Touch Set-Up Clamping and contact no longer depend on the operator; the cycle repeats automatically

A motorized 5-turn coil, rotating poles, and two spray modes combine coil travel, part rotation, and suspension application into one cycle.

Movable 5-Turn Coil Travels automatically from pole to pole, covering the full blade length
360° Rotating Poles Electrically adjustable; the part rotates during and after the cycle so all surfaces can be viewed without unclamping
Automatic Spray Coil-integrated nozzles apply fluorescent suspension uniformly as the coil travels
Manual Spray Hand nozzle for targeted application on specific zones
Recipe-Driven Cycle Coil travel, rotation, and spray times stored per part type; manual and automatic spray can be combined in one program

Demagnetization

AC & DC Decreasing-Cycle Demagnetization on Both Magnetization Axes
DC Decreasing Ramp Polarity reversals with step-by-step decreasing amplitude; cycles and times set by the operator per part type
Additional AC Cycle Alternating field with progressively decaying amplitude; added when the standard ramp does not reach the required value
Both Axes Circular (direct current pass) and longitudinal (flux pass)
Recorded & Stored Residual field written to each cycle report on Delta Screen II; cycle count and timing saved in the part recipe


AC Demag Ramp


DC Demg Ramp

To inquire about the DeltaFlux DeltaFlux MPI Bench for Turbine Blades

Request Pricing

Delta Screen II Operator Panel

Panel Functions Data Recorded on Each Cycle
Touch Screen Backlit display showing bench status and all set parameters
Recipes Parameter sets stored and recalled per part type
Reports One report per cycle; layout and content customizable at order stage
Data Export USB (JPG), Excel over the network, and remote access for service
Date & Time Timestamp of each test
Magnetizing Current Set value and delivered value
Residual Field Measured after demagnetization
UV Light Value Measured and entered by the operator
Codes & Exam Type Operator and part codes, exam type, and demagnetization type
Operator Level: Use and monitoring Supervisor Level: Programming and configuration

Technical Specifications

Technical Specifications

Technical Specifications

DeltaFlux DF B 100 AL B TR Technical Specifications
Method: Wet fluorescent magnetic particle inspection, per UNI EN ISO 9934
Circular Magnetization: AC / FW DC single phase, 4,000 A; direct current pass, cycles A-B / A-C / B-C
Longitudinal Magnetization: AC / FW DC single phase, 4,000 A; motorized 5-turn coil, automatic pole-to-pole travel
Adjacent Conductor (Optional): Delrin flat support with copper bar; circular magnetization of small or thin-section blades without direct pole contact
Auxiliary Output: On-board 48 V socket for AC/DC electromagnetic yoke
Demagnetizing: AC and DC decreasing cycle, circular and longitudinal axes
Poles: Orientable, tilting, pneumatic with digital pressure adjustment; electrically adjustable 360° rotation
Contact Heads: Tinned copper braid
Suspension Application: Automatic coil-integrated nozzles and manual hand nozzle
Construction: Modular aluminum structure to limit residual magnetic field
Tanks: Stainless steel recovery tank plus containment and recirculation tank, located in a separate area
UV Lighting: Latest-generation UV LED, handheld or overhead on 2-axis guided support
Controls: Delta Screen II backlit touch screen with recipe storage and per-cycle reporting
Recorded Parameters: Current, demagnetization, residual field, and UV value logged for each cycle
Data Export: USB (JPG), Excel over network, remote service access