The handy L-10 portable magnetic coil is great for field applications to magnetize a variety of part sizes and shapes for magnetic particle inspection. It is specifically designed to detect transverse defects in shafts, spindles and similar components. It can inspect parts up to 10" (250mm) diameter. The L-10 has a wear-resistant resin coating and is supplied with a footswitch to energize the coil and 12 ft. (3.6 m) of flexible supply cable.
Available in 2 Models:
| Waveform: | AC |
| Coil Size: | 10.25" (26cm) ID |
| 15" (38cm) OD | |
| 2.5" (6.3cm) Wide | |
| Field Strength: | 3,600 Ampere-Turns |
| Duty Cycle: | 25% maximum on time, 15 seconds |
| Power Cord: | 12 ft. (3.6m) |
| Control Cord: | 6 ft. (1.8m) |
| Weight: | 13 lbs. (6 kg) |
| Electrical: | 115V: 60 Hz, 15A |
| 230V: 50/60 Hz, 7.5A | |
| Environmental: | 32° - 120°F (0° - 49°C), up to 100% RH, up to 16,300 ft. (5,000m) altitude, non-condensing |
| Regulatory: | Designed for mains +/- 10%, over voltage category ll, wet locations, pollution degree 2 environment |