Magnaflux Portable Accessories
Cables, Connectors, Clamps & Remote Devices
Cables
4/0 cables are essential for P-series, M-series, and CSV-series power packs. Cables can be used to flow magnetizing current through a large part or structure, or wrapped around pipes and long weldments for longitudinal magnetization. Magnaflux 4/0 cables are available in standard welding grade or heavy-duty grade with extra insulation and tinned conductors. Cables are factory terminated in a variety of lengths and a choice of standard lug connections or heavy-duty quick connect fittings. Custom-length cables are also available.
Model #'s
626350-180, 626351-180, 626352-180, 628833-180 - 15' Cables
626350-240, 626352-240, 628833-240 - 20' Cables
Standard 4/0 Cable Assembly with two 626342 lug connectors on each end
(626350) | 
Standard 4/0 Cable Assembly, with 628828 QC-F to 628829 QC-M quick connector terminals
(628833) |
Connectors / Adapters
Connectors for attaching 4/0 cables to Magnaflux magnetizing equipment including wet benches, powerpacks and mobile units.
Model #'s
1238, 1574, 626342, 628829, 628828
Standard 4/0 CableTerminal Lug
(626342)
|
QC-M Quick Connect Male Terminal for 4/0 cable (used with QC-F)
(628829) |
QC-F Quick Connect Female Terminal for 4/0 cable (used with QC-M)
(628828) |
Adapter Kits
Used in combination with prods, connectors and cable wraps to provide modularity in magnetizing techniques
Model #
628832
Lug to Quick Connect Adapter Set, includes 1 each Lug to QC-M and Lug to QC-F adapters. Used in combination with prods, connectors and cable wraps to provide modularity in magnetizing techniques.
(628832) |
Remote Control Cables
Remote control cables for P-Series and M-Series power packs allow the inspector to trigger mag shots and adjust amperage settings at the examination site.
Model #s
169621, 626797, 626120
P Series Remote Cable / Switch for triggering a mag shot, 15 ft / 4.6 m long, 3 PTL Plug
(626797) | 
Mag Kit Remote Palm Button for use with the Mag Kit & P-Series power packs. Mounts directly to the side of the Mag Kit bench.
(169621) |
M-Series Pendant, Remote Control Box / Cable for M-Series, 15 ft / 4.6 m. Provides full control of M-Series power pack at the examination site. Includes waveform selection, amperage adjustment, and mag/demag triggers
(626120) |
Prod Sets
When using P-series, M-series, and CSV-series power packs, effective magnetization depends on secure contact with the part or structure being examined. Connections can be made in a variety of ways depending on the specific needs of the application. Magnaflux prod sets are convenient handheld electrodes used for conducting sectional inspections of welds, casting, forgings and other large and complex part shapes. Comfortable, pistol style grips and out of the way cable hookups make it easy for testing parts that are not wet-bench friendly.
Standard Prod Sets
Model #'s
157662, 622088
Standard Prod Set. Set of two hand-held electrodes with mag shot trigger and 4/0 lug connections.
Solid copper tips 0.375 in / 9.5 mm diameter, 3.75 in / 95 mm long.
(P-Series: 157662 | M-Series: 622088) |
Dual Horizontal Prod Assemblies
Model #'s
157781, 622499
Dual Horizontal Prod Set. Single hand-held set with two electrodes, mag shot trigger and 4/0 lug connections. Adjustable electrode spacing with 3.875-8.125 in / 9.8-20.6 cm range. Solid copper tips 0.375 in / 9.5 mm diameter, 3.75 in / 95 mm long.
(P-Series: 157781 | M-Series: 622499) |
Contact Clamps
Magnaflux spring-loaded and heavy-duty contact clamps facilitate the easier, more accurate inspection of tubing, bars and tubular assemblies such as aircraft engine mounts, fuselage sections and large welded structures.
Model #'s
1865A, 169802, 54975
Standard Contact Clamp. Spring-loaded clamp with braided copper contact and lug connection. Used for smaller structures and parts up to 2.5 in / 6.4 cm diameter.
(1865A) | 
Heavy Duty C Contact Clamp. Large C-Clamp with leaded copper braid contact pad and double lug connections. Used for large structures and parts up to 7 in / 18 cm diameter.
(169802) |
