G.A.L. Gage Co. : No: 5 V-WAC Gauge

G.A.L. Gage Co. : No: 5 V-WAC Gauge

V-WAC Gauge Model #5

Quickly determines if fillet welds meet NRC Visual Weld Acceptance Criteria for structural weldments

The V-Wac Gauge easily and quickly checks the four essential measurements required for compliance with NCR Visual Weld Acceptance Criteria. It checks undercut depth, porosity comparison, amount of porosity per linear inch and crown height. The V-Wac Gauge can be purchased separately or as part of a complete set of seven Fillet Weld Gauges, that determine if your welds conform to specifications.

Features of the V-WAC Gauge:

  • Accurate: Undercut depth or crown height scale can be read to 1/64 inch. Porosity comparison of 1/8 inch and 1/16 inch. Linear gauge in 1/16 inch increments.
  • Easy to Use: Pointer is easy to set and locking screw holds it in position for later reference. Figures and increments are etched into surface. They are easy to read and will not rub off.
  • Fast: All required measurements are made with a single gauge.
  • Sturdy: Gauge is made of Stainless Steel.
  • Handy: Gauge is 1.25" x 4" . Can be carried in your pocket.

Note: There is a $25 small order fee for orders valued less than $100. Can combine with other products to reach minimum.

Product Literature

Description Part # Saved Price Select Option Add to
G.A.L. Gage Co. CAT #5, V-WAC Gauge, inch GA-GAL-05 $43.25
G.A.L. Gage Co. CAT #5, V-WAC Gauge, metric GA-GAL-05/M $43.25
G.A.L. Gage Co. Calibration (with single combined gauge cert for multiple gauge purchase - price per gauge) GA-GAL-CAL-A $20.00
G.A.L. Gage Co. Calibration (with separate gauge cert for each gauge purchased - price per gauge) GA-GAL-CAL-B $25.00