| Probe |
Connector |
10way LEMO 2B |
| Channels |
1 Hall Effect Sensor, 2 coils |
| Construction |
Stainless Steel / Titanium |
| Max Pull |
100 kg |
| Longevity |
Greater than 1000 tubes |
| Gain |
Channels |
3 independent channels with gain lock |
| Range |
Gain adjustable 0 to 72dB |
| Increments |
0.1, 1 and 6 dB Steps |
| Data Conversion |
Bit Depth |
12bit |
| Sample Rate |
5kHz |
| Dynamic Range |
40dB |
| Filters |
Normal High Pass |
DC to 1kHz |
| Normal Low Pass |
5 to 1kHz |
| Alarms |
Level |
Fully configurable, Freeze, Tone or visual |
| Display |
Type |
24bit color, daylight readable, 5.7" (14.5cm) screen |
| Viewable Area |
Horizontal x Vertical - 4.6" x 3.4" (115.2 x 86.4mm) |
| Resolution (pixels) |
640 x 480 |
| Configurable Screen |
Full Screen, up to 4 panes with variable function |
| Display Modes |
Time base (0.1-20 seconds, Stripchart and Waterfall) |
| Graticules |
None, Grid (4 sizes: 5, 10, 15 at 20% FSH) |
| Offset |
Trace Position: ± 150% |
| Storage |
Setup |
Micro SD up to 32GB, storing over 10,000 settings |
| Stored Screen Shots |
Micro SD up to 32GB, storing over 10,000 settings |
| Inspect |
Comprehensive Record, Replay and Storage |
| Outputs |
PC Connectivity |
USB (Full PC remote control plus Real Time) |
| VGA |
Full 15 way VGA output |
| Languages |
|
English. Others to follow |
| Power |
External |
100-240VAC, 50-60Hz, 700mA |
| Battery |
Internal 8.4 V @ 3200mAh |
| Running Time |
100% backlight over 8hrs.
Over 10.5 hrs. with 40% backlight |
| Charging Time |
2.5 hrs. charging time. Simultaneous charge and operation |
| Physical |
Weight |
2.7 lbs. (1.2 kg) |
| Size (W x H x D) |
9.4" x 5.7" x 2.1" (237.5 x 144 x 52 mm) |
| Material |
Aluminum Alloy Mg Si 0.5 powder coated |
| Operating Temperature |
-4° to 140°F (-20° to 60°C) |
| Storage Temperature |
Storage for up to 12 months. -4° to 95°F (-20° to 35°C).
Nominal 68°F (20°C) |
| IP Rating |
IP54 |
