Universal Bead Seat Wheel Probe

Universal Bead Seat Wheel Probe

Overview

The Universal Wheel Probe was designed to allow inspection of tube-well and the bead seat areas of aircraft wheels. The probe has a wide sensing area of 0.5" on either side of the radius. This allows you to rapidly scan the tube-well by indexing the probe down by 0.4" per turn. The bead-seat radius is then inspected using the radius of the probe. The rim can be inspected within one turn. Adjustment of inspection positions, for tube wall, bead-seat, and bead-seat radius are required. The probe is for small wheel and brake shops with low numbers of wheels. Shops with higher volume should consider an automated wheel inspection system.

Assembly and Inspection Instructions

Cover the probe sensing surface with Teflon tape.

Assemble the probe into the guide. Mount the wear-pads and insert the probe and screws. Push the probe all the way forward and lightly tighten the screws so that the probe can move under a bit of pressure.

 

Place the assembly along the tube well and press the probe in until the side wear pads touch the tube well. While holding the probe in place, press it all the way up against the bridge of the tube well and tighten the screws.

 

The probe should be able to move along and around the tube well with a minimum amount of wobble and fit into the beat seat radius and onto the rim.

 

Insert the probe cable into the probe and into your instrument. Set the frequency to 100 kHz and perform a pre-cal. Follow your procedure for the rest of the operation.

Kit Includes

  • Wheel reference standard and inspection procedure
  • Wheel Probe A or P (the difference is only in the material of the housing)
  • Wheel Probe Guide with wear-pads and probe mounting screws
  • Eddy Current instrument with cable to a 4-socket Fischer receptacle (on probe), configured to handle a driver-receiver sensor arrangement.
Description Part # Saved Price Select Option Add to
Universal Wheel Inspection Probe in Aluminum Housing, 50kHz-500kHz, with 4 pin Fischer connector, including Guide already mounted (includes: Wear-Pads and Guide Lock Screw (Threaded Stud 4-40 and Coupling Nut)) EC-RO-UWP $3,850.00
TP-6000136 Sectional Bead Seat Reference Standard W/3 1.52mmL x 0.75mmD x 0.10 mmW EDM, A350 main inboard wheel section EC-RO-TP-6000136 $1,125.00
EK-2-079-2, Probe Cable for Olympus/Evident NORTEC 600/500/2000 Lemo 16 pin M to 4 Pin Fischer (M102), for driver - receiver probes EC-RO-EK-2-079-2 $685.00