Circle Systems B&W Wet Particles, Contrast Paint

Circle Systems B&W Wet Particles, Contrast Paint

Safe Black and White Magnetic Particle Materials

Circle Systems Safe Black & White Magnetic Particle Materials
Mi-Glow 820, Mi-Glow 820AX, Mi-Glow 820LS-RTU and Mi-Glow 820S-RTU have all been discontinued and replaced by CircleSafe 820A.

Uses:
For Cracks and other flaws too small to be reliably detected with dry powder MPI
Stress Corrsion Cracking in Pipelines

Black & White Magnetic Particle Tests, when properly performed, have a sensitivity similar to wet fluorescent particles, but without the need for a UV Lamp and a darkened area.

Mi-Glow® 820 Liquid Concentrate

Mi-Glow® 820 contains Mi-Glow® 106 black particles premixed with liquid Wetting Agent 771, for use in water media. Higher particle concentration provides heavier indication buildup for easy detection. It is designed to be used with visible light, for finding discontinuities in finished products. Mi-Glow® 820 can be used with Mi-Glow® WCP White Contrast Paint.

Physical Characteristics:
Black solution with a slight detergent odor.

Particle Certification:
Particles meet all relevant industry specifications, including if not limited to MIL-STD-1949, AMS 3042, MIL-STD-271, NAVSEA 250-1500-1, NTR-1E and ASTM E 1444. Certification is included with each shipment.

Particle Color Particle Size AMS Standard SAE Sensitivity* Temperature Range
Black 1.5µm 3042 6 32-120°F (0-49°C)

*Representative of the number of lines shown on an AISI 01 Ketos tool steel ring as defined by SAE AS5282



CircleSafe® 820AX Aerosol Black Oxide in Oil Bath

CircleSafe® 820AX is an aerosol spray can of Mi-Glow® 106 black particles and CircleSol M, a refined petroleum distillate. It is designed to be used with visible light, for detecting discontinuities found in finished products and structural fabrications. Higher particle concentration provides heavier indication buildup for easy detection. The carbon dioxide propellant reduces combustible hazard. CircleSafe® 820AX can be used with Mi-Glow® WCP White Contrast Paint.

Physical Characteristics:
Black liquid with a slight detergent odor contained in an aerosol package.

Particle Certification:
Particles, carrier and mixture meet or exceed all relevant industry specifications, including but not limited to MIL-STD-1949, MIL-STD-271(SH), ASTM E 709, ASTM B & PV Code - Section V and NAVSEA 250-1500-1. AMS 3041, AMS 3042, AMS 3161, AMS 2641 and DOD-F-87935 are covered under MIL-STD-1949. Certification is included with each shipment.

Particle Color Particle Size AMS Standard SAE Sensitivity * Temperature Range
Black 1.5µm 3042 6 120°F maximum

*Representative of the number of lines shown on an AISI 01 Ketos tool steel ring as defined by SAE AS5282



Mi-Glow® 820LS RTU Black Oxide in Oil Bath

Mi-Glow® 820LS RTU is Ready-to-Use oil bath packaged in an hand-held spray bottle. The bath contains Mi-Glow® 106 black particles and CircleSol M, a refined petroleum distillate. It is designed to be used with visible light, for revealing discontinuities on machined component parts.

Physical Characteristics:
Black liquid, odorless.

Particle Certification:
Particles, carrier and mixture meet or exceed all relevant industry specifications including but not limited to MIL-STD-1949, MIL-STD-271(SH), ASTM E 709, ASTM B & PV Code - Section V and NAVSEA 250-1500-1. AMS 3041, AMS 3042, AMS 3161, AMS 2641 and DOD-F-87935 are covered under MIL-STD-1949. Certification is included with each shipment.

Particle Color Particle Size AMS Standard SAE Sensitivity* Temperature Range
Black 1.5µm 3042 6 32°-120°F (0°-49°C)

*Representative of the number of lines shown on an AISI 01 Ketos tool steel ring as defined by SAE AS5282



Mi-Glow® 820S RTU Black Oxide in Water Bath

Mi-Glow® 820S RTU is a Ready-to-Use water bath packaged in an hand-held spray bottle. The water bath contains Mi-Glow® 106 black particles and liquid Wetting Agent 771. It is designed to be used with visible light, for revealing discontinuities on machined component parts.

Physical Characteristics:
Black solution with a slight detergent odor.

Particle Certification:
Particles meet all relevant industry specifications, including but not limited to MIL-STD-1949, MIL-STD-271, NAVSEA 250-1500-1, NTR-1E and ASTM E 1444. Certification is included with each shipment.

Particle Color Particle Size AMS Standard SAE Sensitivity * Temperature Range
Black 1.5µm 3042 6 32°-120°F (0°-49°C)

*Representative of the number of lines shown on an AISI 01 Ketos tool steel ring as defined by SAE AS5282



Mi-Glow® WCP White Contrast Paint

Mi-Glow® WCP is a specially formulated fast drying white contrast paint, used to create a consistent background on the component surface in a visible magnetic particle inspection. When dry, the white contrast paint is resistant to the wet method baths used for inspection, but is easily removed from the demagnetized component surface with acetone. Mi-Glow® WCP can be used with any of the Mi-Glow® and CircleSafe® black particle materials.

Physical Characteristics:
White liquid with a characteristic odor.

Particle Color Particle Size AMS Standard SAE Sensitivity* Temperature Range
White 32°-120°F (0°-49°C)


Note: Small order fee of $25.00 for orders valued less than $250.00.

Description Part # Saved Price Select Option Add to
WCP, White Contrast Paint, case of 12-16 oz, aerosol cans MT-CS-FG-3740 $182.00
Circle Systems #820LS-RTU, case of 6 qt size bottles with spray pumps MT-CS-FG-3622 Request Pricing
Circle Systems #820S-RTU, case of 6 qt size bottles with spray pumps MT-CS-FG-3612 Request Pricing
Circle Systems #820AX, 12-16 oz. cans/case MT-CS-FG-3609 Request Pricing
Circle Systems #820A, 12-16 oz. cans/case MT-CS-FG-3600 $210.00
Circle Systems #820, 1-4 quart bottles/case MT-CS-FG-3611 Request Pricing