Scandico PR 200-X UV & White Light Meter

Scandico PR 200-X UV & White Light Meter

Photometer / Radiometer, with UV Measurement up to 200,000 μW/cm²


The Scandico Systems PR 200-X is a combined lux and UV-A meter, specially designed for control measurements when making NDT tests and other types of measurements of illuminance and UV-A radiation, in the field as well as in the laboratory. The instrument is compact, ergonomic and easy to use. The two detectors are cosine corrected for angular incidence of light and the illuminance detector is carefully filtered to the spectral sensitivity of the human eye in accordance with the CIE standard. The UV-A detector measures radiation between 315 – 380 nm with a peak at 355 nm. The light sensitive device used in the detectors are very stable long life silicon diodes which results in high reliability and increases recalibration intervals.

Spectral Sensitivity UV-A

Cosine Correction UV-A



  • High degree of accuracy.
  • Wide measuring range.
  • Built-in temperature compensation.
  • Short rise and fall times.
  • Dual detectors in one instrument.
  • Detector extended from readout unit.
  • Auto off, instrument shuts off automatically
  • Auto backlight, display is lit when instrument is used in environments less than 30 lux.
  • Metric and imperial illumination units.
  • The accuracy is better than +/- 3% or less than 1 Lux and 1 μW/cm² within the temperature range -5ºC - +50ºC for all usual light sources.
  • The repeatability is as good as +/- 1 digit or less than 1 lux and 1 μW/cm².
  • Unit is supplied with a Calibration Certificate

Technical Specifications

PR 200-X Specifications

Measurement Function

Measurement of illuminance 0.1 - 200,000 lux = 0.01 – 20,000 fc

Measurement of UV-A irradiance 1 - 200,000 μW/cm² = 0.01 – 2,000 W/m²


VIS: Silicon photodiode, Vλ-filtered and cosine corrected, with 1m connection cable.

UV-A: Silicon photodiode, UVA-filtered and cosine corrected, with 1m connection cable

Accuracy Better than +/- 3% or less than 1 Lux and 1 μW/cm²
Temperature Range -5ºC - +50ºC
Hold Function When required the value measured can be ”frozen” on the display by pressing HOLD
Peak Function By pressing PEAK button the display will show highest (or lowest) measured value until button is pressed again.
Battery 2 x Size AA or LR6, 1.5V
Current Consumption Without backlight: Approx 5 mA.
With backlight: 60mA
Battery Life Without backlight: approx 350 hours.
With backlight: approx 35 hours.
Calibration Temperature +22ºC
Dimensions Read out unit: 168 x 75 x 36 mm.
Detector unit: 96 x 47 x 24 mm
Weight 280g, 770g with carrying case & standard accessories
Standard Accessories Carrying case
Detector fixture
Instruction manual
Calibration Certificate
Extra Accessories Special detectors
Bracket for permanent mounting

Product Literature

Description Part # Saved Price Select Option Add to
Scandico PR 200-X UV & White Light Meter UV-SS-PR200-X Request Pricing