|
BAQ Hardness Test block for UCI, Rockwell Calibration with ISO and ASTM certificate, Approx. Hardness Value: (select hardness value)
Model #
|
HT-BAQ-HVP-9016HRC-EP-M
|
|
$735.00
|
|
BAQ Special probe SL for measurings e.g. in drill holes or cogwheels (Tooth base) Shaft diameter / length: 5 mm / 18 mm / Customer Specified Load: 49N (HV5)
|
HT-BAQ-14-129A-5
|
|
$3,895.00
|
|
BAQ Impact device D for hardness tester dynaROCK. Standard impact device for most hardness testing tasks.
|
HT-BAQ-22-120
|
|
$1,250.00
|
|
BAQ Rebound hardness tester dynaROCK III with impact device D, test block, USB charger, direct data transfer to a USB flash drive, test certificate, robust case.
|
HT-BAQ-22-100
|
|
$2,925.00
|
|
BAQ Separate Standard UCI Probe (select test load)
Model #
|
HT-BAQ-14-Master
|
|
$3,825.00
|
|
BAQ AlphaDur Mini II Kit with Probe (select test load)
Model #
|
HT-BAQ-14-102-Master
|
|
$7,650.00
|
|
BAQ Separate Standard UCI Probe (select load)
Model #
|
HT-BAQ-11-121-Master
|
|
$3,150.00
|
|
BAQ High Precision Stand
|
HT-BAQ-11-130
|
|
$2,025.00
|
|
BAQ alphaDUR Mini Kit with Probe (select load)
Model #
|
HT-BAQ-AD-12-100-10-Master
|
|
Discontinued Item
|
|
BAQ Mobile Printer
|
HT-BAQ-11-151
|
|
$895.00
|
|
BAQ AlphaDur-II with 10kg Probe and Cable
|
HT-BAQ-10-100
|
|
$6,500.00
|
|
BAQ AlphaDur Mini II Main Unit and SL Probe (shaft diameter / length: 5 mm / 18 mm) (select test load)
Model #
|
HT-BAQ-14-102-129A-3-M
|
|
$7,825.00
|
|
BAQ Special probe SL for measurings e.g. in drill holes or cogwheels (Tooth base) Shaft diameter / length: 5 mm / 18 mm, (select test load)
Model #
|
HT-BAQ-14-129A-3-M
|
|
$4,230.00
|
|
BAQ AlphaDur Mini II Main Unit and SL-L Probe (shaft diameter / length: 5 mm / 34 mm) (select test load)
Model #
|
HT-BAQ-14-102-129B-3-M
|
|
$7,995.00
|
|
BAQ Hardness Test block for UCI, Vickers Calibration with ISO and ASTM certificate, Approx. Hardness Value: (select Hardness Value and Test Load)
Model #
|
HT-BAQ-HVP-9016HV-EP-M
|
|
$800.00
|
|
BAQ Impact device DL for hardness tester dynaROCK Impact device with longer impact body. The diameter of the front pipe is 4.2 mm.
|
HT-BAQ-22-121
|
|
$2,155.00
|
|
BAQ Rebound hardness tester dynaROCK III without impact device, including test block, USB charger, direct data transfer to a USB flash drive, test certificate, robust case
|
HT-BAQ-22-100-xD1
|
|
$2,085.00
|
|
Poldi Hardness Tester Standard Kit Includes: Hardness Tester, steel test bar good for approximately 40 measurements, magnifier, hardness table and carrying case
|
HT-BAQ-POLDI
|
|
$975.00
|
|
BAQ Power Supply / battery charger + Adapter for Charger (US/CA)
|
HT-BAQ-12-173
|
|
$205.00
|
|
BAQ Special Probe SL for measuring in drill holes or cogwheels (Tooth base); Shaft Length: 0.7" (18mm); Available Test Loads: 3N, 10N, 20N, 30N, 49N, 98N
|
HT-BAQ-11-129A
|
|
$3,850.00
|
|
BAQ Probe Support for Flat Specimen
|
HT-BAQ-11-131
|
|
$665.00
|
|
BAQ AlphaDur-II with 5kg Probe and Cable
|
HT-BAQ-10-050
|
|
$6,500.00
|
|
BAQ Special probe SL-L for measurings e.g. in drill holes or cogwheels (Tooth base) Shaft diameter / length: 5 mm / 34 mm, (selected test load)
Model #
|
HT-BAQ-14-129B-3-M
|
|
$4,500.00
|
|
BAQ Impact device DC for hardness tester dynaROCK. Extremely short impact device for measurements at inaccessible locations or in pipes.
|
HT-BAQ-22-122
|
|
$1,250.00
|
|
BAQ Rebound hardness tester dynaROCK III without impact device and test block, including USB charger, direct data transfer to a USB flash drive, test certificate, robust case
|
HT-BAQ-22-100-xD2
|
|
$2,030.00
|
|
Steel bar for Poldi Hardness Tester 12.5 x 12.5 x 152 mm Tensile strength approx. 70 kg/mm² Engraved charge number. Pack of 5
|
HT-BAQ-POLDI-02-EN
|
|
$365.00
|
|
BAQ Special Probe SL for measuring in drill holes or cogwheels (Tooth base); Shaft Length: 1.3" (34mm); Available Test Loads: 3N, 10N, 20N, 30N, 49N, 98N
|
HT-BAQ-11-129B
|
|
$4,035.00
|
|
BAQ Wooden box with foam tray for Hardness test blocks 90x16 mm (3.5"x0.6") diameter, Measurements: 135x125x42 mm (5.3"x4.9"x1.7")
|
HT-BAQ-HVP-9016-BOX1
|
|
$35.00
|
|
BAQ Calibration of the probe including certificate (shipping costs not included)
|
HT-BAQ-R-S-KAL
|
|
$370.00
|
|
BAQ Probe Support for Round Specimen 10 -50 mm (0.4 - 2")
|
HT-BAQ-11-132
|
|
$705.00
|
|
BAQ AlphaDur-II with 3kg Probe and Cable
|
HT-BAQ-10-030
|
|
$6,500.00
|
|
BAQ Impact device D+15 for hardness tester dynaROCK The impact device has a recessed reactance coil and a smaller placement surface (11 mm x 14 mm instead of Ø 20mm) for hardness measuring in slots and deepened areas.
|
HT-BAQ-22-123
|
|
$1,395.00
|
|
BAQ DAkkS-Calibration of a UCI-Hardness Tester with one Probe according to DIN 50159 by an accredited laboratory
|
HT-BAQ-R-AD-KAL-DIN
|
|
$735.00
|
|
BAQ Probe Support for Round Specimen 50 - 250 mm (2 - 10")
|
HT-BAQ-11-133
|
|
$730.00
|
|
BAQ AlphaDur-II with 2kg Probe and Cable
|
HT-BAQ-10-020
|
|
$6,500.00
|
|
BAQ Impact device C for hardness tester dynaROCK Impact device with lower impact energy e.g. for measurements on surface-hardened parts.
|
HT-BAQ-22-124
|
|
$1,250.00
|
|
BAQ DAkkS-Calibration of a UCI-Hardness Tester with one Probe according to ASTM A1038 by an accredited laboratory
|
HT-BAQ-R-AD-KAL-ASTM
|
|
$735.00
|
|
BAQ AlphaDur-II with 1kg Probe and Cable
|
HT-BAQ-10-010
|
|
$6,500.00
|
|
BAQ Impact device G for hardness tester dynaROCK Impact device with increased impact energy e.g. for measurements on heavy casting and forged parts. Measurement only in the Brinell range up to 650 HB.
|
HT-BAQ-22-125
|
|
$2,480.00
|
|
BAQ Handle for the probes with ball knob
|
HT-BAQ-11-142
|
|
$185.00
|
|
BAQ Carrier bag for AlphaDUR
|
HT-BAQ-10-140
|
|
$125.00
|
|
BAQ Protective Sleeve for Probe (Screwed on the probe for protection of the UCI-Rod)
|
HT-BAQ-11-171
|
|
$170.00
|
|
BAQ USB Data Transfer software
|
HT-BAQ-11-152
|
|
$305.00
|
|
BAQ Probe Cable
|
HT-BAQ-11-172
|
|
$280.00
|
|
BAQ DAkkS-Calibration of a UCI Hardness Tester with Probe according to DIN 50159 or ASTM A1038 through a DKD accredited laboratory
|
HT-BAQ-R-S-KAL-DKD
|
|
$650.00
|
|
BAQ Connection cable dynaROCK III - Impact device Lemo push-pull connector and Binder screw lock
|
HT-BAQ-R-RP-KABEL-V2
|
|
$265.00
|
|
BAQ Test Block for Leeb Hardness Tester - 3.5"x2.2" (90x55mm) Diameter, 6 lbs. (2.73kg); Engraved hardness scales: HLD, HLDL, HLD+15, HLC; Possible hardness values: 530 +/- 40HLD, 630 +/- 40HLD, 790 +/- 40HLD (Formally HVP-HLD-EN)
|
HT-BAQ-HVP-HLD
|
|
$555.00
|
|
BAQ Test Block for Leeb Hardness Tester with Dakks or ASTM Certificate - 3.5"x2.2" (90x55mm) Diameter, 6 lbs. (2.73kg); Engraved hardness scales: HLD, HLDL, HLD+15, HLC; Possible hardness values: 530 +/- 40HLD, 630 +/- 40HLD, 790 +/- 40HLD
|
HT-BAQ-HVP-HLD-Z
|
|
$745.00
|