AFFRI 206 EX/EXS/EX2 Automatic Rockwell Tester

AFFRI 206 EX/EXS/EX2 Automatic Rockwell Tester

AFFRI 206 EX/EXS/EX2
Automatic Rockwell Tester

affri 206ex series

The AFFRI 206 EX Series are user friendly hardness testers.

  • Load forces are applied directly on the measuring axis through two incremental dynamometric load cells.
  • There are no ratio load forces, levers or fulcrums. This eliminates problems associated with dead weight systems used on traditional testers.
  • The 206 EX Series hardness testers are very accurate, they are not affected by structural deflection, misalignment, or vibration and can also operate in an inclined position.
  • The 206 EX Series does not need to be leveled.


Applications:

206 EX For all metals, iron, steel, tempered steel, cast iron, brass, aluminum, copper, and metal alloys with more than 0.02" (0.6mm) thickness.
206 EXS Heat treatment, hardening, nitriding, cementation and hard facing with less than 0.02" (0.6mm) depth.
206 EX2 For all metals, iron, steel, tempered steel, cast iron, brass, aluminum, copper, and metal alloys with more than 0.02" (0.6mm) thickness. Heat treatment, hardening, nitriding, cementation and hard facing with less than 0.6mm depth.

indenter indenter indenter 3


Features:

LISA

L.I.S.A

Laser pointing system option allows for a precise test position pointing before the contact between the indenter and the sample. Excellent solution for gear teeth and blade as well as cutting tools edge.


Clamping Hood

Assures a perfect locking of the specimen through the whole test cycle. No need for additional supports when testing long samples.



clamping hood
microscope

Microscope

Available with 20X magnifying lens, provided with battery lighting. It allows performance of Brinell and Vickers exact indentation measurements.



Piece Holders

From large flat tables to V shaped anvils, all AFFRI accessories are customizable according to customers' specifications.



piece holders
Roving Arm
  • Rotating arm option with self-alignment of the optic with the indentation axis. Automatic centering with no need to move the specimen. Interchangeable objectives: 1x, 2x, 3x, 4x for 5x, 10x, 15x, 20x and 15x eyepiece for manual measure. (Total magnification: 75x, 150x, 225x and 300x). Camera USB 2.0 - 1.2 megapixel.
  • Software for Vickers, Knoop and Brinell indentation reading: Automatic and manual measurements, image zoom, focus signal, trace CHD case depth diagrams, statistics, create test reports, memory of image.
  • Metallurgical analysis: Automatic spheroidal nodule analysis (ISO 945); Automatic phase percentage analysis; Polygon perimeter, insertion and area measure; Line to line angle; Circle diameter; Line to point; Point to point.


Force Range

Preload: 3 - 10 kfg (29.42 - 98.07N)
Rockwell: 60 - 100 - 150 kgf (588.4 - 980.7 - 1471 N)
Superficial Rockwell: 15 - 30 - 45 kgf (147.1 - 294.2 - 441.3 N)
Brinell: 10 - 15.6 - 30 - 31.2 - 62.5 - 125 - 187.5 kgf
(98.07 - 153.2 - 294.2 - 306.5 - 612.9 - 1226 - 1839 N)
Vickers / Knoop: 3 - 10 - 15 - 30 - 60 - 100 kgf (29.42 - 98.07 - 147.1 - 294.2 - 588.4 - 980.7 N)


Feasible Tests


206 EX 206 EXS 206 EX2
Rockwell


HRA, HRB, HRC,
HRD, HRE, HRF,
HRG, HRH, HRK
_ HRA, HRB, HRC,
HRD, HRE, HRF,
HRG, HRH, HRK
Superficial
Rockwell







_ HR15N, HR30N,
HR45N, HR15T,
HR30T, HR45T,
HR15S, HR30S,
HR54S, HR15W,
HR30W, HR45W,
HR15X, HR30X,
HR45X, HR15Y,
HR30Y, HR45Y
HR15N, HR30N,
HR45N, HR15T,
HR30T, HR45T,
HR15S, HR30S,
HR54S, HR15W,
HR30W, HR45W,
HR15X, HR30X,
HR45X, HR15Y,
HR30Y, HR45Y
Brinell HBTW









  • 1/30 - 2.5/15.6 - 2.5/31.5








_

Aluminum Alloys

  • 1/30 - 2.5/15.6
  • 2.5/31.5 - 5/125
  • 2.5/62.5
  • 2.5/187.5
  • 2.5/187.5


Carbon Steel & Cast Iron

  • 2.5/187.5
Brinell HBW




  • HB1/10
  • HB2.5/62.5
  • HB2.5/187.5
  • HB5/125

  • HB1/30
  • HB2.5/15.625
  • HB2.5/31.25


  • HB1/10 - HB1/30
  • HB2.5/15.625
  • HB2.5/31.25
  • HB2.5/187.5
  • HB5/125
Vickers / Knoop





  • HV10 - HV60
  • HV100




  • HV3
  • HV15
  • HV30



  • HV3
  • HV10
  • HV15
  • HV30
  • HV60
  • HV100
Temperature -40° to 176°F (-40° to 80°C)


Software

software

software
Set of hardness test methods
software
Measurement settings
software
Conversion scales tables
software
Results, average and conversion
software
Storable and printable statistics

      • Large LCD and lots of functions: Simultaneous view of 2 scales
        • 1 - For the test and method
        • 2 - From the list of conversion scales. Conversion values for all hardness scales, HR, HB, HV, HSD, HK, HRN, HRT, N/mm)
      • Precise testing settings: Check load applied correctly. Select dwell time. Calibration for direct and indirect method conform to ASTM E18 ISO 6508.
      • Dynamic results: Simultaneous view of the range of results for statistic. Results average update at the last measure. Statistic CP CPX CX Histogram and number of test corresponding to tolerance values (Lo, Hi, OK). Create 10 file record data each one 350 meaures.
      • Unique performances: Temperature measure C° useful for certificate test conform to ASTM E 18 ISO 6508. Depth of indentation in 0,01 micron. Acoustic signal for dwell time and for preload. Printer connection output RS 232C or converter to USB. Back light LCD display 128 x 64 pixel. Touch keypad board IP 64 protection. Powered by rechargeable battery for 100% portability of the hardness tester (OPTIONAL).


        Standard Accessories:

        • Flat anvil 2.4" (60mm)
        • "V" anvil 2.4" (60mm)
        • Combined spot "V" + flat anvil
        • Wooden accessories case
        • Calibration certificate
        • Hardness conversion table
        • Dust cover
        • HRC diamond indenter (206 EX, 206 EX2)
        • HRB ball indenter Ø 1/16" (206 EX, 206 EX2)
        • HRC test block (206 EX, 206 EX2)
        • HRB test block (206 EX, 206 EX2)
        • HRN diamond indenter (206 EXS, 206 EX2)
        • HRT ball indenter Ø 1/16" (206 EXS, 206 EX2)
        • HRN test block (206 EXS, 206 EX2)
        • HRT test block (206 EXS, 206 EX2)


        Additional Accessories Upon Request:

        • Ball indenter Ø 1 - 2.5 - 5 mm and 1/2" - 1/4" - 1/8"
        • Vickers diamond indenter 136°
        • Brinell test block
        • Vickers test block
        • Microscope with lighting for Vickers and Brinell measuring
        • VRS system for Brinell and Vickers measuring
        • Printer 20 column
        • Statistics program
        • Large flat anvil 150 mm Ø
        • Bench table for hardness tester
        • Special indenter art. 604 for tests standard insides of tubes

        Technical Specifications

        206 EX 206 EXS 206 EX2
        Accuracy Better than 1%
        Temperature Range From 50° to 95° (10° to 35°C)
        Data Output RS232 C Standard / USB Optional
        Power Supply 110 or 220 V / 50/60 Hz
        Principle of Operation Dynamometric load cell
        Standards EN-ISO 6506-2 / EN-ISO 6507-2 / EN-ISO 6508-2 / ASTM E10 / ASTM E18 / ASTM E103 / ASTM E384 / JIS
        Height Capacity 215 mm / 8.5" (As option 300mm / 12")
        Depth Capacity 190 mm / 75" (As option 200mm / 8.5")
        Tolerable Weight Up to 2200 lbs. (1000 kg)
        Packing Weight 187 lbs. (85 kg)
        Packing Dimensions 20" x 23" x 40" (50 x 60 x 100 cm)
        Fields of Use






        For all metals; iron, steel, tempered steel, cast iron, brass, aluminum, copper and metal alloys with more than 0.6mm thickness

        Heat treatment, hardening, nitriding, cementation, and hard facing with less than 0.6mm depth


        For all metals; iron, steel, tempered steel, cast iron, brass, aluminum, copper and metal alloys with more than 0.6mm thickness. Heat treatment, hardening, nitriding, cementation, and hard facing with less than 0.6mm depth

        Product Literature

        Description Part # Saved Price Add to
        206 EX (R) Kit Includes: Unit, HRB Test Block with ILAC traceable certificate, Ball Indenter 1/16", Diamond Indenter Rockwell C, Flat anvil, V face anvil, Combined spot flat and V anvil, Manual HT-AF-206EX-R-KIT $5,849.00
        206 EX (R+B) Kit Includes: Unit, HRB & HRC Test Blocks with ILAC traceable certificate, Ball Indenter 1/16", Diamond Indenter Rockwell C, Flat anvil, V face anvil, Combined Spot Flat + V Anvil, Manual HT-AF-206EX-RB-KIT $7,085.00
        206 EXS (R) Kit Includes: Unit, HR30N & HR30T Test Blocks with ILAC traceable certificate, Ball Indenter 1/16" W 6.35, Diamond Indenter Rockwell C N 6.35, Flat Anvil, V face Anvil, Combined Spot Flat+V Anvil, Manual HT-AF-206EXS-R-KIT $5,849.00
        206 EXS (R+B) Kit Includes: Unit, HRB & HRC Test Blocks with ILAC traceable certificate, Ball Indenter 1/16", Diamond Indenter Rockwell C, Flat anvil, V face anvil, Combined Spot Flat + V Anvil, Manual HT-AF-206EXS-RB-KIT $7,085.00