E-Mail Us: sales@ndtsupply.com
Call Us: (913) 685 - 0675

vidisco-logo-master

Vidisco Digital Radiography

vidisco-digital-radiography-image

Why should I buy a Vidisco DR system?

Reason 1 - Image Quality

Seeing is Believing!

You may have been told that Digital Radiography can provide image quality as good or better than film, but on a gut level you really don't believe it - do you?

The below image is a copy of a copy, you are looking at it on a standard monitor without any enhancement. Look at the detail! You can't get this image quality on the best film or CR device. It was made by the BAM Institute in Germany using a Vidisco Rayzor X DR System.

The BAM-5 is something of a legend in the field of Digital Radiography. Although it is possible to conduct quality testing with test patterns on any device or target, the fact that 20 year old BAM-5 test piece has been used to compare the performances of every X-ray imaging system currently in existance, makes it unique. Sometimes, it is enough to look at the welds on the image following a BAM-5 inspection to gauge the results without even studying empiric data of the IQI, penetrameters, wires, etc.. Seeing is Believing!

vidisco-digital-radiography 

Above, is an image of famous BAM-5 test piece X-ray, taken with Vidisco's RayzorX digital X-ray system at the BAM facility in Berlin. It clearly shows the almost unlimited performance potential of this Vidisco x-ray system, courtesy of BAM.

BAM is the German Federal Institute for Material Research and Testing. It regularly conducts NDT testing for standardization in various areas of expertise for all of Europe.

BAM describes the BAM-5 test piece as follows: "The BAM-5 is a test piece weld with known defects. It is a hand welded steel plate (St 35) 8 mm thick, the welding is max. 10 mm thick. It contains all types of welding flaws, especially cracks at the surface of the welding seam".

Courtesy of BAM

vidisco-digital-radiography-welding flaws

Reason 2 - Safety:

Images are created in seconds using a much lower dose of radiation than conventional or CR systems.

Reason 3 - Portability:

The complete system fits in the trunk of a compact car. All components are battery powered and wireless operation is available. They are compact, so they are easy to carry into the field for NDT inspections.

Reason 4 - Cost:

DR uses no film, no chemicals and no processors. There is no routine maintenance and nothing to wear out, get out of alignment, etc. For anyone with reasonable production requirements and those with sourcing issues, DR will have a significantly lower cost of long term ownership.

Reason 5 - Communications:

Images can be immediately emailed to your engineers, level III and customers.

Reason 6 - Convenience:

Carrying case doubles as the operational platform.

Reason 7 - Rugged:

Vidisco's DR systems are designed to function in extreme temperatures and in difficult terrain

Reason 8 - Speed:

System setup within minutes

Reason 9 - Production:

Save money and time - inspection can be carried out parallel to ongoing production work due to low dose exposure and small closure area.

Reason 10 - Quality:

No excuses image quality. Outstanding resolution and penetration, clear images down to the smallest detail (hairline cracks and tiny defects).

Reason 11 - Data Storage:

Vidisco's proprietary XbitPro Software enables storage of X-ray images together with relevant data such as digital photographs made during NDT inspection. Previous inspections are easily retrieved for comparison.

Reason 12 - No waiting:

High quality X-ray images are virtually instantaneous, no need to wait hours for results or preform reshoots due to poor results.

Reason 13 - No AC power needed:

Fully battery operated - over 5 hours of continuous NDT inspection in the field. No dependency on external power supply. Self charging during AC operation, for example from a DC/AC vehicle inverter.

Reason 14 - Wireless Connection:

Built-in wireless x-ray operates over 900 feet (300 meters). Seamless wireless operation with no need for cables or wires, especially in tight and elevated locations (aircraft, ships, electrical lines, etc.).



Vidisco Ltd., a leader in X-ray technology,  manufactures portable digital X-ray systems that meet all international standards. Vidisco’s systems are especially developed for NDT use and provide a solution for a wide variety of applications with low and high energy. Vidisco provides a selection of panels that operate with a single configuration, which answers the specific needs of different applications including detection of cracks, erosion& corrosion, FOD, composite materials and more. 


 

Vidisco-NDT-Applications vidisco-xbitpro-software vidisco-ndt-video-gallery
vidisco-ndt-x-ray-gallery vidisco-ndt-info-center vidisco-ndt-x-ray-systems
vidisco-ndt-accessories