PH Tool Phased Array Cal Standard Blocks (PACS)

PH Tool Phased Array Cal Standard Blocks (PACS)

Used for angle beam verification, probe angle exit points, calibration for wedge delay, sensitivity and DAC/TCG for thicknesses up to 2"

Phased Array Cal Standard Block

PH Tool PACS Block

Phased Array Calibration Standard Blocks (PACS) are used for angle beam verification, probe angle exit points, calibration for wedge delay, sensitivity and DAC/TCG for thicknesses up to 2".

Inch Version:
The three radii (0.500", 1.000" and 2.000") allow for exit point verification, velocity and sound path calculations. This block contains five holes at 3/64" diameter drilled through the 1.000" width, located at 0.100", 0.200", 0.400", 0.600", 0.800", 1.200", 1.400", 1.600", 1.800" and 1.900" from the respective scanning surface.

Metric Version:
The three radii (12.5mm, 25mm and 50mm) allow for exit point verification, velocity and sound path calculations. This metric block contains five holes at 1.2mm diameter drilled through the 25mm width, located at 2.5mm, 5.0mm, 10.0mm, 15.0mm, 20.0mm, 30.0mm, 35.0mm, 45.0mm and 47.5mm from the respective scanning surface.

Inch Dimensions: 18.0" x 2.0" x 1.0"
Metric Dimensions: 450mm x 50mm x 25mm

Phased Array Cal Block, AWS Type with 0.060" SDHs

 PACS-AWS-Block

Special Version of the Phased Array Calibration Block (PACS) with 0.060" diameter Side-drilled Holes for use with AWS requirements. The block is used for angle beam verification, probe angle exit point, calibration for wedge delay, sensitivity and DAC/TCG for thicknesses up to 2".

The three radii (0.500", 1.000", 2.000") allow for exit point verification, velocity and sound path calculations. This block contains five holes at 0.060" diameter drilled though the 1.000" width, located at 0.100", 0.200", 0.400", 0.600", 0.800", 1.200", 1.400", 1.600", 1.800" and 1.900" from the respective scanning surface.

Generous hole spacing eliminates "ghost" images from adjacent holes. Also includes an engraved scale from 30° to 70° associated with the 0.800" hole for beam angle verification.

Inch Dimensions: 18.0" x 2.0" x 1.0"
Metric Dimensions: 450mm x 50mm x 25mm

Mini Phased Array Cal Standard Block 

Mini PACS Block


The Mini Phased Array Calibration Standard (PACS) Block is a smaller, more portable version of the original PACS Block. The block includes a total of 4 holes at 3/64" diameter drilled through the 1.000" width, located at 0.200", 0.400", 0.600", 0.700", 0.800", 0.900", 1.100" and 1.300" from the respective scanning surface.

Dimensions: 1.500" Height x 1.000" width x 10.00" Length

Phased Array Cal Standard Notch Block

PACS Notch Block


The Phased Array Calibration Standard (PACS) Notch Block has been specially designed for the use with Phased Array instruments used for sizing of OD and ID-connected cracks. The block contains four EDM slots at depths of 20, 40, 60 and 80% and a width of 0.031". Standard thickness is 1.000"; however other sizes can be ordered.

Dimensions: 1.000" thick x 2.000" wide x 7.00" long

Materials

Standard Materials

  • 1018 Carbon Steel
  • 7075-T6 Aluminum
  • 304 Stainless Steel
Special Materials (Call for Price)

  • 4340 Steel
  • Titanium
  • 316 Stainless Steel
  • 2024-T3 Aluminum
  • 6061-T6 Aluminum
  • 90/10 Copper Nickel
  • Hastelloy C276
  • Monel 400
  • Hastelloy X
  • 1018 Steel, Nickel Plated
  • A387 Grade 11
  • A387 Grade 22
  • A387 Grade 91
  • A516 Grade 70
  • 321 Stainless Steel
  • AL6XN
  • 2101 Duplex Stainless Steel
  • 2205 Duplex Stainless Steel
  • 6AL-4V Titanium
  • 7050-T7451 Aluminum
  • Brass
  • Brass Alloy 932
  • Copper 110
  • Cast Ductile Iron
  • Cast Gray Iron
  • Zirconium 702
  • Inconel 600
  • Inconel 625

Purchasing Details:

  • Material certification is included with all blocks.
  • Serialization and Dimensional certification are available at additional cost.
  • If additional certification is required, make sure to select UT-PHT-PACS-Cert when adding items to the shopping cart.
  • Optional Hardwood Case available upon request
Description Part # Saved Price Select Option Add to

PACS Standard Blocks
PH Tool Phased Array Calibration Standard Block (PACS) (select material)
Model #
UT-PHT-PACS-1018-Master
$2,485.00
PH Tool Phased Array Calibration Standard Block (PACS) - Metric Version (select material)
Model #
UT-PHT-PACS-1018-M-Master
$2,858.00
PH Tool Wooden Case for PACS Block UT-PHT-PACS-CASE
$148.00
PH Tool Phased Array Calibration Standard Block (PACS) Dimensional Certificate (New Block) UT-PHT-PACS-CERT
$155.00
PH Tool Phased Array Calibration Standard Block (PACS) Dimensional Certificate (Recertification) UT-PHT-PACS-RECERT
$310.00

PACS AWS Version Blocks
PH Tool Phased Array Calibration Block (PACS), AWS Version (0.060" Holes) Inch (select material)
Model #
UT-PHT-PACS-AWS-1018-Master
$2,485.00
PH Tool Phased Array Calibration Block (PACS), AWS Version (0.060" Holes) Dimensional Certificate (New Block) UT-PHT-PACS-AWS-CERT
$155.00
PH Tool Phased Array Calibration Block (PACS), AWS Version (0.060" Holes) Dimensional Certificate (Recertification) UT-PHT-PACS-AWS-RECERT
$310.00

Mini PACS Block

PH Tool Mini Phased Array Calibration Standard (PACS) Block (select material)
Model #
UT-PHT-MINI-PACS-1018-Master
$1,322.00
PH Tool Mini Phased Array Calibration Standard (PACS) Wooden Case UT-PHT-MINI-PACS-CASE
$95.00
PH Tool Mini Phased Array Calibration Standard (PACS) Dimensional Certificate (New Block) UT-PHT-MINI-PACS-CERT
$120.00
PH Tool Mini Phased Array Calibration Standard (PACS) Dimensional Certificate (Recertification) UT-PHT-MINI-PACS-RECERT
$240.00

PACS Notch Block

PH Tool Phased Array Calibration Standard (PACS) Notch Block (select material)
Model #
UT-PHT-PACS-NOTCH-1018-Master
$2,911.00
Ph Tool Phased Array Calibration Standard (PACS) Notch Block Wooden Case UT-PHT-PACS-NOTCH-CASE
$87.00
PH Tool Phased Array Calibration Standard (PACS) Notch Block Dimensional Certificate (New Block) UT-PHT-PACS-NOTCH-CERT
$120.00
PH Tool Phased Array Calibration Standard (PACS) Notch Block Dimensional Certificate (Recertification) UT-PHT-PACS-NOTCH-RECERT
$240.00