PH Tool Phased Array Cal Blocks (PACB)

PH Tool Phased Array Cal Blocks (PACB)


No. 3 (3/4" Thick) -   2 Holes


 

This new Phased Array Block designed by Paul Holloway of Holloway NDT & Engineering contains all of the required features of the ASME Sec V Art Basic Calibration Block for non-piping applications, yet spaces the holes out on a longer, narrower block. The block contains two holes at 3/32" diameter drilled through the 1.500" width, located at 1/2T and 3/4T. This block is designed to reduce echo interference when performing a DAC/TCG calibration. The 1/2T hole is isolated from all other reflectors, while the 1/4T hole doubles as the 3/4T with the block inverted. A 150° angle has also been machined into the block ends to diminish corner reflections. As a result, the 1/2T hole signal is free of other reflection sources to sound path distances exceeding 6".

Dimensions: 0.750" thick x 1.50" wide x 16.00" long


No. 2 (3/4" Thick) -    3 Holes



This new Phased Array calibration block designed by PH Tool contains all of the required features on the ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on longer, narrower block. This block contains three holes at 3/32" diameter drilled through the 1.500" width, located at 1/4T, 1/2Tand 34T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.

Dimensions: 0.750" thick x 1.50" wide x 14.00" long


No. 2 (11/2" Thick) -  3 Holes

This new Phased Array calibration block designed by PH Tool contains all of the required features on the ASME Sec V Article 4 Basic Calibration Block, yet spaces the holes out on a longer, narrower block. This block contains three holes at 1/8" diameter drilled through the 1.500" width, located at 14T, 1/2T and 3/4T. It also contains two EDM notches at 2% deep x 0.10" wide x 1.500" long on opposite surfaces of one end.

Dimensions: 1.50" thick x 1.50" wide x 17.00" long

Materials

Standard Materials

  • 1018 Carbon Steel
  • 7075-T6 Aluminum
  • 304 Stainless Steel
Special Materials (Call for Price)

  • 4340 Steel
  • Titanium
  • 316 Stainless Steel
  • 2024-T3 Aluminum
  • 6061-T6 Aluminum
  • 90/10 Copper Nickel
  • Hastelloy C276
  • Monel 400

  • Hastelloy X

  • 1018 Steel, Nickel Plated

  • A387 Grade 11

  • A387 Grade 22

  • A387 Grade 91

  • A516 Grade 70

  • 321 Stainless Steel

  • AL6XN

  • 2101 Duplex Stainless Steel

  • 2205 Duplex Stainless Steel

  • 6AL-4V Titanium

  • 7050-T7451 Aluminum

  • Brass

  • Brass Alloy 932

  • Copper 110

  • Cast Ductile Iron

  • Cast Gray Iron

  • Zirconium 702

  • Inconel 600

  • Inconel 625

Purchasing Details:

  • Material certification is included with all blocks
  • Serialization and Dimensional certification are available at additional cost.
  • If additional certification is required, make sure to select UT-PHT-PACB2-1.5-Cert, UT-PHT-PACB2-.75-Cert, UT-PHT-PACB3-.75-Cert when adding items to the shopping cart.
  • Optional Hardwood Case available upon request.
Description Part # Saved Price Select Option Add to

PACB No. 3 3/4" Blocks - 2 Holes
PH Tool Phased Array Calibration Block (PACB) No. 3 - 3/4" thick (select material)
Model #
UT-PHT-PACB3-1018-.75-Master
$1,380.00
PH Tool Wooden Case for PA Calibration Block No. 3 - 3/4" Thick UT-PHT-PACB3-CASE-.75
$148.00
PH Tool Phased Array Calibration Block (PACB) No. 3 - 3/4" thick Dimensional Certificate (New Block) UT-PHT-PACB3-75-CERT
$120.00
PH Tool Phased Array Calibration Block (PACB) No. 3 - 3/4" thick Dimensional Certificate (Recertification) UT-PHT-PACB3-75-RECERT
$240.00

PACB No. 2 3/4" Blocks - 3 Holes
PH Tool Phased Array Calibration Block (PACB) No. 2 - 3/4" thick (select material)
Model #
UT-PHT-PACB2-1018-.75-Master
$1,372.00
PH Tool Wooden Case for PA Calibration Block No. 2 - 3/4" Thick UT-PHT-PACB2-CASE-.75
$117.00
PH Tool Phased Array Calibration Block (PACB) No. 2 - 3/4" thick Dimensional Certificate (New Block) UT-PHT-PACB2-.75-CERT
$120.00
PH Tool Phased Array Calibration Block (PACB) No. 2 - 3/4" thick Dimensional Certificate (Recertification) UT-PHT-PACB2-.75-RECERT
$240.00

PACB No. 2 1.5" Blocks - 3 Holes
PH Tool Phased Array Calibration Block (PACB) No. 2 - 1.5" Thick (select material)
Model #
UT-PHT-PACB2-1018-1.5-Master
$1,853.00
PH Tool Wood Case for Phased Array Calibration Block (PACB) - 2 - 1.5" Thick UT-PHT-PACB2-CASE-1.5
$148.00
PH Tool Phased Array Calibration Block (PACB) No. 2 - 1.5" Thick Dimensional Certificate (New Block) UT-PHT-PACB2-1.5-CERT
$120.00
PH Tool Phased Array Calibration Block (PACB) No. 2 - 1.5" Thick Dimensional Certificate (Recertification) UT-PHT-PACB2-1.5-RECERT
$240.00