Available in two viscosities, medium and high, to address most UT applications.
Easier removal with water wash, not film-forming.
Less residue and better multi-metal capabilities.
Slow drying for extended inspection time.
Reduced surface tension provides fast wetting.
Contains no glycerin, which can interfere with subsequent penetrant inspection.
Environmentally friendly - no formaldehyde, nitrates, nitrites or glycol ethers.
|
Viscosity: Standard (medium: flowable gel) High (stiff gel, stays in place)
pH: 8.0 nominal at 20°C
Operating Range: 18° to 180°F (-8° to 82°C) for most ambient temperature flaw detection and thickness gauging applications.
Halogens and Sulfar: less than 50 ppm
Conforms to ASTM F519 - this test method provides a means by which to detect possible hydrogen embrittlement of steel parts (plated / coated or bare) due to contact with chemicals during manufacturing, overhaul or service life.
|